target/linux/ramips/dts/MZK-DP150N.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-dp150n", "ralink,rt5350-soc";
  10         model = "Planex MZK-DP150N";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 power {
  16                         label = "mzk-dp150n:green:power";
  17                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  18                 };
  19         };
  20
  21         gpio-keys-polled {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_RESTART>;
  31                 };
  32         };
  33 };
  34
  35 &gpio1 {
  36         status = "okay";
  37 };
  38
  39 &spi0 {
  40         status = "okay";
  41
  42         m25p80@0 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 compatible = "jedec,spi-nor";
  46                 reg = <0>;
  47                 spi-max-frequency = <10000000>;
  48
  49                 partition@0 {
  50                         label = "uboot";
  51                         reg = <0x0 0x30000>;
  52                         read-only;
  53                 };
  54
  55                 partition@30000 {
  56                         label = "uboot-env";
  57                         reg = <0x30000 0x10000>;
  58                         read-only;
  59                 };
  60
  61                 factory: partition@40000 {
  62                         label = "factory";
  63                         reg = <0x40000 0x10000>;
  64                         read-only;
  65                 };
  66
  67                 partition@50000 {
  68                         label = "firmware";
  69                         reg = <0x50000 0x3b0000>;
  70                 };
  71         };
  72 };
  73
  74 &spi1 {
  75         spidev@0 {
  76                 compatible = "linux,spidev";
  77                 spi-max-frequency = <10000000>;
  78                 reg = <0>;
  79         };
  80 };
  81
  82 &pinctrl {
  83         state_default: pinctrl0 {
  84                 gpio {
  85                         ralink,group = "jtag", "uartf", "led";
  86                         ralink,function = "gpio";
  87                 };
  88         };
  89 };
  90
  91 &ethernet {
  92         mtd-mac-address = <&factory 0x4>;
  93 };
  94
  95 &esw {
  96         mediatek,portmap = <0x17>;
  97 };
  98
  99 &wmac {
 100         ralink,mtd-eeprom = <&factory 0>;
 101         ralink,led-polarity = <1>;
 102 };