target/linux/ramips/dts/NCS601W.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "wansview,ncs601w", "ralink,rt5350-soc";
   7         model = "Wansview NCS601W";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 compatible = "jedec,spi-nor";
  15                 reg = <0>;
  16                 spi-max-frequency = <10000000>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x30000>;
  26                                 read-only;
  27                         };
  28
  29                         partition@30000 {
  30                                 label = "u-boot-env";
  31                                 reg = <0x30000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         factory: partition@40000 {
  36                                 label = "factory";
  37                                 reg = <0x40000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@50000 {
  42                                 compatible = "denx,uimage";
  43                                 label = "firmware";
  44                                 reg = <0x50000 0x7b0000>;
  45                         };
  46                 };
  47         };
  48 };
  49
  50 &pinctrl {
  51         state_default: pinctrl0 {
  52                 gpio {
  53                         ralink,group = "i2c", "jtag", "uartf";
  54                         ralink,function = "gpio";
  55                 };
  56         };
  57 };
  58
  59 &ethernet {
  60         mtd-mac-address = <&factory 0x4>;
  61 };
  62
  63 &esw {
  64         mediatek,portmap = <0x2f>;
  65 };
  66
  67 &wmac {
  68         ralink,mtd-eeprom = <&factory 0>;
  69 };
  70
  71 &ehci {
  72         status = "okay";
  73 };
  74
  75 &ohci {
  76         status = "okay";
  77 };