target/linux/ramips/dts/NW718.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "NW718", "ralink,rt3050-soc";
   7         model = "Netcore NW718";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 cpu {
  13                         label = "nw718:amber:cpu";
  14                         gpios = <&gpio0 13 1>;
  15                 };
  16
  17                 usb {
  18                         label = "nw718:amber:usb";
  19                         gpios = <&gpio0 8 1>;
  20                 };
  21
  22                 wps {
  23                         label = "nw718:amber:wps";
  24                         gpios = <&gpio0 14 1>;
  25                 };
  26         };
  27
  28         gpio-keys-polled {
  29                 compatible = "gpio-keys-polled";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32                 poll-interval = <20>;
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio0 10 1>;
  37                         linux,code = <0x198>;
  38                 };
  39
  40                 wps {
  41                         label = "wps";
  42                         gpios = <&gpio0 0 1>;
  43                         linux,code = <0x211>;
  44                 };
  45         };
  46 };
  47
  48 &spi0 {
  49         status = "okay";
  50
  51         m25p80@0 {
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 compatible = "jedec,spi-nor";
  55                 reg = <0 0>;
  56                 linux,modalias = "m25p80", "mx25l3205d";
  57                 spi-max-frequency = <25000000>;
  58
  59                 partition@0 {
  60                         label = "u-boot";
  61                         reg = <0x0 0x30000>;
  62                         read-only;
  63                 };
  64
  65                 partition@30000 {
  66                         label = "config";
  67                         reg = <0x30000 0x20000>;
  68                         read-only;
  69                 };
  70
  71                 factory: partition@50000 {
  72                         label = "factory";
  73                         reg = <0x50000 0x10000>;
  74                         read-only;
  75                 };
  76
  77                 partition@60000 {
  78                         label = "firmware";
  79                         reg = <0x60000 0x3a0000>;
  80                 };
  81         };
  82 };
  83
  84 &pinctrl {
  85         state_default: pinctrl0 {
  86                 gpio {
  87                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  88                         ralink,function = "gpio";
  89                 };
  90         };
  91 };
  92
  93 &ethernet {
  94         mtd-mac-address = <&factory 0x4>;
  95 };
  96
  97 &esw {
  98         mediatek,portmap = <0x2f>;
  99 };
 100
 101 &wmac {
 102         ralink,mtd-eeprom = <&factory 0>;
 103 };
 104
 105 &otg {
 106         status = "okay";
 107 };