target/linux/ramips/dts/Newifi-D1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
  10         model = "Newifi-D1";
  11
  12         memory@0 {
  13                 device_type = "memory";
  14                 reg = <0x0 0x10000000>;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23
  24                 status-red {
  25                         label = "newifi-d1:red:status";
  26                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 status-green {
  30                         label = "newifi-d1:green:status";
  31                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 statys-blue {
  35                         label = "newifi-d1:blue:status";
  36                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         gpio-keys-polled {
  41                 compatible = "gpio-keys-polled";
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52
  53         gpio_export {
  54                 compatible = "gpio-export";
  55                 #size-cells = <0>;
  56
  57                 usb2power {
  58                         gpio-export,name = "usb2power";
  59                         gpio-export,output = <1>;
  60                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  61                 };
  62
  63                 usb3power {
  64                         gpio-export,name = "usb3power";
  65                         gpio-export,output = <1>;
  66                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  67                 };
  68         };
  69 };
  70
  71 &sdhci {
  72         status = "okay";
  73
  74         pinctrl-names = "default";
  75         pinctrl-0 = <&sdhci_pins>;
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <10000000>;
  87                 m25p,chunked-io = <32>;
  88
  89                 partition@0 {
  90                         label = "u-boot";
  91                         reg = <0x0 0x30000>;
  92                         read-only;
  93                 };
  94
  95                 partition@30000 {
  96                         label = "u-boot-env";
  97                         reg = <0x30000 0x10000>;
  98                         read-only;
  99                 };
 100
 101                 factory: partition@40000 {
 102                         label = "factory";
 103                         reg = <0x40000 0x10000>;
 104                         read-only;
 105                 };
 106
 107                 partition@50000 {
 108                         label = "firmware";
 109                         reg = <0x50000 0x1fb0000>;
 110                 };
 111         };
 112 };
 113
 114 &pcie {
 115         status = "okay";
 116
 117         pcie0 {
 118                 mt76@0,0 {
 119                         reg = <0x0000 0 0 0 0>;
 120                         device_type = "pci";
 121                         mediatek,mtd-eeprom = <&factory 0x8000>;
 122                         ieee80211-freq-limit = <5000000 6000000>;
 123                 };
 124         };
 125
 126         pcie1 {
 127                 mt76@1,0 {
 128                         reg = <0x0000 0 0 0 0>;
 129                         device_type = "pci";
 130                         mediatek,mtd-eeprom = <&factory 0x0000>;
 131                 };
 132         };
 133 };
 134
 135 &ethernet {
 136         mtd-mac-address = <&factory 0xe000>;
 137 };
 138
 139 &pinctrl {
 140         state_default: pinctrl0 {
 141                 gpio {
 142                         ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
 143                         ralink,function = "gpio";
 144                 };
 145         };
 146 };