target/linux/ramips/dts/Newifi-D1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Newifi-D1";
   9
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x10000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,115200";
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 status-red {
  23                         label = "newifi-d1:red:status";
  24                         gpios = <&gpio0 14 1>;
  25                 };
  26
  27                 status-green {
  28                         label = "newifi-d1:green:status";
  29                         gpios = <&gpio0 13 1>;
  30                 };
  31
  32                 statys-blue {
  33                         label = "newifi-d1:blue:status";
  34                         gpios = <&gpio0 16 1>;
  35                 };
  36         };
  37
  38         gpio-keys-polled {
  39                 compatible = "gpio-keys-polled";
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42                 poll-interval = <20>;
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio0 15 1>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50
  51         gpio_export {
  52                 compatible = "gpio-export";
  53                 #size-cells = <0>;
  54
  55                 usb2power {
  56                         gpio-export,name = "usb2power";
  57                         gpio-export,output = <1>;
  58                         gpios = <&gpio0 9 0>;
  59                 };
  60
  61                 usb3power {
  62                         gpio-export,name = "usb3power";
  63                         gpio-export,output = <1>;
  64                         gpios = <&gpio0 11 0>;
  65                 };
  66         };
  67 };
  68
  69 &sdhci {
  70         status = "okay";
  71
  72         pinctrl-names = "default";
  73         pinctrl-0 = <&sdhci_pins>;
  74 };
  75
  76 &spi0 {
  77         status = "okay";
  78
  79         m25p80@0 {
  80                 #address-cells = <1>;
  81                 #size-cells = <1>;
  82                 compatible = "jedec,spi-nor";
  83                 reg = <0>;
  84                 spi-max-frequency = <10000000>;
  85                 m25p,chunked-io = <32>;
  86
  87                 partition@0 {
  88                         label = "u-boot";
  89                         reg = <0x0 0x30000>;
  90                         read-only;
  91                 };
  92
  93                 partition@30000 {
  94                         label = "u-boot-env";
  95                         reg = <0x30000 0x10000>;
  96                         read-only;
  97                 };
  98
  99                 factory: partition@40000 {
 100                         label = "factory";
 101                         reg = <0x40000 0x10000>;
 102                         read-only;
 103                 };
 104
 105                 partition@50000 {
 106                         label = "firmware";
 107                         reg = <0x50000 0x2000000>;
 108                 };
 109         };
 110 };
 111
 112 &pcie {
 113         status = "okay";
 114
 115         pcie0 {
 116                 mt76@0,0 {
 117                         reg = <0x0000 0 0 0 0>;
 118                         device_type = "pci";
 119                         mediatek,mtd-eeprom = <&factory 0x8000>;
 120                         ieee80211-freq-limit = <5000000 6000000>;
 121                 };
 122         };
 123
 124         pcie1 {
 125                 mt76@1,0 {
 126                         reg = <0x0000 0 0 0 0>;
 127                         device_type = "pci";
 128                         mediatek,mtd-eeprom = <&factory 0x0000>;
 129                 };
 130         };
 131 };
 132
 133 &ethernet {
 134         mtd-mac-address = <&factory 0xe000>;
 135 };
 136
 137 &pinctrl {
 138         state_default: pinctrl0 {
 139                 gpio {
 140                         ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
 141                         ralink,function = "gpio";
 142                 };
 143         };
 144 };