target/linux/ramips/dts/Newifi-D1.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
  10         model = "Newifi-D1";
  11
  12         aliases {
  13                 led-boot = &led_blue;
  14                 led-failsafe = &led_blue;
  15                 led-running = &led_blue;
  16                 led-upgrade = &led_blue;
  17         };
  18
  19         memory@0 {
  20                 device_type = "memory";
  21                 reg = <0x0 0x10000000>;
  22         };
  23
  24         chosen {
  25                 bootargs = "console=ttyS0,115200";
  26         };
  27
  28         gpio-leds {
  29                 compatible = "gpio-leds";
  30
  31                 status-red {
  32                         label = "newifi-d1:red:status";
  33                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  34                         default-state = "off";
  35                 };
  36
  37                 status-green {
  38                         label = "newifi-d1:green:status";
  39                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                 };
  42
  43                 led_blue: status-blue {
  44                         label = "newifi-d1:blue:status";
  45                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  46                         default-state = "on";
  47                 };
  48         };
  49
  50         gpio-keys-polled {
  51                 compatible = "gpio-keys-polled";
  52                 poll-interval = <20>;
  53
  54                 reset {
  55                         label = "reset";
  56                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_RESTART>;
  58                 };
  59         };
  60
  61         gpio_export {
  62                 compatible = "gpio-export";
  63                 #size-cells = <0>;
  64
  65                 usb2power {
  66                         gpio-export,name = "usb2power";
  67                         gpio-export,output = <1>;
  68                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  69                 };
  70
  71                 usb3power {
  72                         gpio-export,name = "usb3power";
  73                         gpio-export,output = <1>;
  74                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  75                 };
  76         };
  77 };
  78
  79 &sdhci {
  80         status = "okay";
  81 };
  82
  83 &spi0 {
  84         status = "okay";
  85
  86         m25p80@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <10000000>;
  90                 m25p,chunked-io = <32>;
  91
  92                 partitions {
  93                         compatible = "fixed-partitions";
  94                         #address-cells = <1>;
  95                         #size-cells = <1>;
  96
  97                         partition@0 {
  98                                 label = "u-boot";
  99                                 reg = <0x0 0x30000>;
 100                                 read-only;
 101                         };
 102
 103                         partition@30000 {
 104                                 label = "u-boot-env";
 105                                 reg = <0x30000 0x10000>;
 106                                 read-only;
 107                         };
 108
 109                         factory: partition@40000 {
 110                                 label = "factory";
 111                                 reg = <0x40000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@50000 {
 116                                 label = "firmware";
 117                                 reg = <0x50000 0x1fb0000>;
 118                         };
 119                 };
 120         };
 121 };
 122
 123 &pcie {
 124         status = "okay";
 125 };
 126
 127 &pcie0 {
 128         mt76@0,0 {
 129                 reg = <0x0000 0 0 0 0>;
 130                 mediatek,mtd-eeprom = <&factory 0x8000>;
 131                 ieee80211-freq-limit = <5000000 6000000>;
 132         };
 133 };
 134
 135 &pcie1 {
 136         mt76@0,0 {
 137                 reg = <0x0000 0 0 0 0>;
 138                 mediatek,mtd-eeprom = <&factory 0x0000>;
 139         };
 140 };
 141
 142 &ethernet {
 143         mtd-mac-address = <&factory 0xe000>;
 144 };
 145
 146 &pinctrl {
 147         state_default: pinctrl0 {
 148                 gpio {
 149                         ralink,group = "wdt", "rgmii2", "jtag", "uart2", "uart3", "i2c";
 150                         ralink,function = "gpio";
 151                 };
 152         };
 153 };