ramips: fix devicetree compat strings
[openwrt/openwrt.git] / target / linux / ramips / dts / PBR-D1.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "d-team,pbr-d1", "mediatek,mt7628an-soc";
10 model = "PBR-D1";
11
12 chosen {
13 bootargs = "console=ttyS0,115200";
14 };
15
16 aliases {
17 serial0 = &uart2;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x8000000>;
23 };
24
25 gpio-leds {
26 compatible = "gpio-leds";
27
28 usb {
29 label = "pbr-d1:orange:usb";
30 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
31 default-state = "off";
32 };
33
34 power {
35 label = "pbr-d1:orange:power";
36 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
37 default-state = "on";
38 };
39 };
40
41 gpio-keys-polled {
42 compatible = "gpio-keys-polled";
43 #address-cells = <1>;
44 #size-cells = <0>;
45 poll-interval = <20>;
46
47 reset {
48 label = "reset";
49 gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
50 linux,code = <KEY_RESTART>;
51 };
52 };
53
54 wgpio: gpio-wifi {
55 compatible = "mediatek,gpio-wifi";
56 #address-cells = <1>;
57 #size-cells = <0>;
58 gpio-controller;
59 #gpio-cells = <2>;
60 };
61 };
62
63 &pinctrl {
64 state_default: pinctrl0 {
65 gpio {
66 ralink,group = "gpio";
67 ralink,function = "gpio";
68 };
69
70 i2c {
71 ralink,group = "i2c";
72 ralink,function = "gpio";
73 };
74
75 i2s {
76 ralink,group = "i2s";
77 ralink,function = "gpio";
78 };
79
80 spis {
81 ralink,group = "spis";
82 ralink,function = "gpio";
83 };
84
85 wdt {
86 ralink,group = "wdt";
87 ralink,function = "gpio";
88 };
89 };
90 };
91
92 &spi0 {
93 status = "okay";
94
95 pinctrl-names = "default";
96 pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
97
98 m25p80@0 {
99 #address-cells = <1>;
100 #size-cells = <1>;
101 compatible = "jedec,spi-nor";
102 reg = <0>;
103 spi-max-frequency = <40000000>;
104 m25p,chunked-io = <31>;
105
106 partition@0 {
107 label = "u-boot";
108 reg = <0x0 0x30000>;
109 read-only;
110 };
111
112 partition@30000 {
113 label = "u-boot-env";
114 reg = <0x30000 0x10000>;
115 };
116
117 factory: partition@40000 {
118 label = "factory";
119 reg = <0x40000 0x10000>;
120 read-only;
121 };
122
123 partition@50000 {
124 label = "firmware";
125 reg = <0x50000 0x0fb0000>;
126 };
127 };
128
129 spidev@1 {
130 #address-cells = <1>;
131 #size-cells = <1>;
132 compatible = "linux,spidev";
133 reg = <1>;
134 spi-max-frequency = <40000000>;
135 };
136 };
137
138 &i2c {
139 status = "okay";
140 };
141
142 &uart1 {
143 status = "okay";
144 };
145
146 &uart2 {
147 status = "okay";
148 };
149
150 &pwm {
151 status = "okay";
152 };
153
154 &ethernet {
155 mtd-mac-address = <&factory 0x28>;
156 };
157
158 &sdhci {
159 status = "okay";
160 mediatek,cd-high;
161 };