target/linux/ramips/dts/PSG1208.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "PSG1208", "ralink,mt7620a-soc";
   7         model = "Phicomm PSG1208";
   8
   9         gpio-leds {
  10                 compatible = "gpio-leds";
  11
  12                 wan {
  13                         label = "psg1208:white:wps";
  14                         gpios = <&gpio1 15 1>;
  15                 };
  16
  17                 wlan {
  18                         label = "psg1208:white:wlan2g";
  19                         gpios = <&gpio3 0 1>;
  20                 };
  21         };
  22
  23         gpio-keys-polled {
  24                 compatible = "gpio-keys-polled";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27                 poll-interval = <20>;
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&gpio0 1 1>;
  32                         linux,code = <0x198>;
  33                 };
  34         };
  35 };
  36
  37 &gpio1 {
  38         status = "okay";
  39 };
  40
  41 &gpio3 {
  42         status = "okay";
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         m25p80@0 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 linux,modalias = "m25p80", "en25q64";
  54                 spi-max-frequency = <10000000>;
  55
  56                 partition@0 {
  57                         label = "u-boot";
  58                         reg = <0x0 0x30000>;
  59                         read-only;
  60                 };
  61
  62                 partition@20000 {
  63                         label = "u-boot-env";
  64                         reg = <0x30000 0x10000>;
  65                         read-only;
  66                 };
  67
  68                 factory: partition@30000 {
  69                         label = "factory";
  70                         reg = <0x40000 0x10000>;
  71                         read-only;
  72                 };
  73
  74                 partition@40000 {
  75                         label = "firmware";
  76                         reg = <0x50000 0x7b0000>;
  77                 };
  78         };
  79 };
  80
  81 &pinctrl {
  82         state_default: pinctrl0 {
  83                 gpio {
  84                         ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
  85                         ralink,function = "gpio";
  86                 };
  87         };
  88 };
  89
  90 &ethernet {
  91         pinctrl-names = "default";
  92         pinctrl-0 = <&ephy_pins>;
  93         mtd-mac-address = <&factory 0x4>;
  94         mediatek,portmap = "llllw";
  95 };
  96
  97 &pcie {
  98         status = "okay";
  99
 100         pcie-bridge {
 101                 mt76@0,0 {
 102                         reg = <0x0000 0 0 0 0>;
 103                         device_type = "pci";
 104                         mediatek,mtd-eeprom = <&factory 0x8000>;
 105                         mediatek,2ghz = <0>;
 106                 };
 107         };
 108 };
 109
 110 &wmac {
 111         ralink,mtd-eeprom = <&factory 0>;
 112 };