target/linux/ramips/dts/PSG1218.dtsi

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "phicomm,psg1218", "ralink,mt7620a-soc";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys-polled";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14
  15                 reset {
  16                         label = "reset";
  17                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  18                         linux,code = <KEY_RESTART>;
  19                 };
  20         };
  21 };
  22
  23 &gpio0 {
  24         status = "okay";
  25 };
  26
  27 &spi0 {
  28         status = "okay";
  29
  30         m25p80@0 {
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33                 compatible = "jedec,spi-nor";
  34                 reg = <0>;
  35                 spi-max-frequency = <10000000>;
  36
  37                 partition@0 {
  38                         label = "u-boot";
  39                         reg = <0x0 0x30000>;
  40                         read-only;
  41                 };
  42
  43                 partition@20000 {
  44                         label = "u-boot-env";
  45                         reg = <0x30000 0x10000>;
  46                         read-only;
  47                 };
  48
  49                 factory: partition@30000 {
  50                         label = "factory";
  51                         reg = <0x40000 0x10000>;
  52                         read-only;
  53                 };
  54
  55                 partition@40000 {
  56                         label = "firmware";
  57                         reg = <0x50000 0x7b0000>;
  58                 };
  59         };
  60 };
  61
  62 &pcie {
  63         status = "okay";
  64
  65         pcie-bridge {
  66                 mt76@0,0 {
  67                         reg = <0x0000 0 0 0 0>;
  68                         device_type = "pci";
  69                         mediatek,mtd-eeprom = <&factory 0x8000>;
  70                         ieee80211-freq-limit = <5000000 6000000>;
  71                 };
  72         };
  73 };
  74
  75 &wmac {
  76         ralink,mtd-eeprom = <&factory 0>;
  77 };