target/linux/ramips/dts/PSR-680W.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "PSR-680W", "ralink,rt3052-soc";
   7         model = "Petatel PSR-680W Wireless 3G Router";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         cfi@1f000000 {
  14                 compatible = "cfi-flash";
  15                 reg = <0x1f000000 0x800000>;
  16                 bank-width = <2>;
  17                 device-width = <2>;
  18                 #address-cells = <1>;
  19                 #size-cells = <1>;
  20
  21                 partition@0 {
  22                         label = "u-boot";
  23                         reg = <0x0 0x30000>;
  24                         read-only;
  25                 };
  26
  27                 partition@30000 {
  28                         label = "u-boot-env";
  29                         reg = <0x30000 0x10000>;
  30                         read-only;
  31                 };
  32
  33                 factory: partition@40000 {
  34                         label = "factory";
  35                         reg = <0x40000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 partition@50000 {
  40                         label = "firmware";
  41                         reg = <0x50000 0x3b0000>;
  42                 };
  43         };
  44
  45         gpio-leds {
  46                 compatible = "gpio-leds";
  47
  48                 wan {
  49                         label = "psr-680w:red:wan";
  50                         gpios = <&gpio0 19 1>;
  51                 };
  52         };
  53
  54         gpio-keys-polled {
  55                 compatible = "gpio-keys-polled";
  56                 #address-cells = <1>;
  57                 #size-cells = <0>;
  58                 poll-interval = <20>;
  59
  60                 reset {
  61                         label = "reset";
  62                         gpios = <&gpio0 0 1>;
  63                         linux,code = <0x198>;
  64                 };
  65         };
  66 };
  67
  68 &pinctrl {
  69         state_default: pinctrl0 {
  70                 gpio {
  71                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  72                         ralink,function = "gpio";
  73                 };
  74         };
  75 };
  76
  77 &ethernet {
  78         mtd-mac-address = <&factory 0x4>;
  79 };
  80
  81 &esw {
  82         mediatek,portmap = <0x3e>;
  83 };
  84
  85 &wmac {
  86         ralink,mtd-eeprom = <&factory 0>;
  87 };
  88
  89 &otg {
  90         status = "okay";
  91 };