target/linux/ramips/dts/PWH2004.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "prolink,pwh2004", "ralink,rt3052-soc";
  10         model = "Prolink PWH2004";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17                 #address-cells = <1>;
  18                 #size-cells = <1>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "u-boot-env";
  28                         reg = <0x30000 0x10000>;
  29                         read-only;
  30                 };
  31
  32                 factory: partition@40000 {
  33                         label = "factory";
  34                         reg = <0x40000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@50000 {
  39                         label = "firmware";
  40                         reg = <0x50000 0x7b0000>;
  41                 };
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46
  47                 wifi {
  48                         label = "pwh2004:red:wifi";
  49                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 power {
  53                         label = "pwh2004:green:power";
  54                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         gpio-keys-polled {
  59                 compatible = "gpio-keys-polled";
  60                 #address-cells = <1>;
  61                 #size-cells = <0>;
  62                 poll-interval = <20>;
  63
  64                 wps {
  65                         label = "wps";
  66                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_RESTART>;
  68                 };
  69         };
  70 };
  71
  72 &pinctrl {
  73         state_default: pinctrl0 {
  74                 gpio {
  75                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  76                         ralink,function = "gpio";
  77                 };
  78         };
  79 };
  80
  81 &esw {
  82         mediatek,portmap = <0x2f>;
  83 };
  84
  85 &wmac {
  86         ralink,mtd-eeprom = <&factory 0>;
  87 };