ramips: enable R6120 USB power
[openwrt/openwrt.git] / target / linux / ramips / dts / R6120.dts
1 /dts-v1/;
2
3 #include "mt7628an.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "netgear,r6120", "mediatek,mt7628an-soc";
10 model = "Netgear R6120";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x4000000>;
22 };
23
24 keys {
25 compatible = "gpio-keys-polled";
26 poll-interval = <20>;
27
28 reset {
29 label = "reset";
30 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
31 linux,code = <KEY_RESTART>;
32 };
33 };
34
35 leds {
36 compatible = "gpio-leds";
37
38 lan {
39 label = "r6120:green:lan";
40 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
41 };
42
43 led_power: power {
44 label = "r6120:green:power";
45 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
46 };
47
48 wlan {
49 label = "r6120:green:wlan2g";
50 gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
51 };
52
53 wlan_orange {
54 label = "r6120:orange:wlan2g";
55 gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
56 };
57
58 wan {
59 label = "r6120:green:wan";
60 gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
61 };
62
63 wan_orange {
64 label = "r6120:orange:wan";
65 gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
66 };
67 };
68
69 usb-regulator {
70 compatible = "regulator-fixed";
71
72 regulator-name = "USB-power";
73 gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
74 regulator-min-microvolt = <5000000>;
75 regulator-max-microvolt = <5000000>;
76 enable-active-high;
77
78 regulator-always-on;
79 };
80 };
81
82 &pinctrl {
83 state_default: pinctrl0 {
84 gpio {
85 ralink,group = "p0led_an", "p1led_an", "p2led_an",
86 "p3led_an", "p4led_an", "wdt",
87 "wled_an", "uart1";
88 ralink,function = "gpio";
89 };
90 };
91 };
92
93 &spi0 {
94 status = "okay";
95
96 flash@0 {
97 compatible = "jedec,spi-nor";
98 reg = <0>;
99 spi-max-frequency = <10000000>;
100
101 partitions {
102 compatible = "fixed-partitions";
103 #address-cells = <1>;
104 #size-cells = <1>;
105
106 partition@0 {
107 label = "u-boot";
108 reg = <0x0 0x40000>;
109 read-only;
110 };
111
112 factory: partition@40000 {
113 label = "factory";
114 reg = <0x40000 0x20000>;
115 read-only;
116 };
117
118 partition@60000 {
119 label = "nvram";
120 reg = <0x60000 0x30000>;
121 read-only;
122 };
123
124 partition@90000 {
125 compatible = "denx,uimage";
126 label = "firmware";
127 reg = <0x90000 0xf60000>;
128 };
129
130 partition@ff0000 {
131 label = "reserved";
132 reg = <0xff0000 0x10000>;
133 read-only;
134 };
135 };
136 };
137 };
138
139 &wmac {
140 status = "okay";
141 mtd-mac-address = <&factory 0x4>;
142 mediatek,mtd-eeprom = <&factory 0x0>;
143 };
144
145 &ethernet {
146 mtd-mac-address = <&factory 0x4>;
147 };
148
149 &pcie {
150 status = "okay";
151 };
152
153 &pcie0 {
154 wifi@0,0 {
155 reg = <0x0000 0 0 0 0>;
156 mediatek,mtd-eeprom = <&factory 0x8000>;
157 ieee80211-freq-limit = <5000000 6000000>;
158 mtd-mac-address = <&factory 0x4>;
159 mtd-mac-address-increment = <(2)>;
160 };
161 };