ramips: add support for Netgear R6350
[openwrt/openwrt.git] / target / linux / ramips / dts / R6350.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "netgear,r6350", "mediatek,mt7621-soc";
10 model = "Netgear R6350";
11
12 aliases {
13 led-boot = &led_power;
14 led-failsafe = &led_power;
15 led-running = &led_power;
16 led-upgrade = &led_power;
17 };
18
19 memory@0 {
20 device_type = "memory";
21 reg = <0x0 0x8000000>;
22 };
23
24 chosen {
25 bootargs = "console=ttyS0,57600";
26 };
27
28 gpio-leds {
29 compatible = "gpio-leds";
30
31 led_power: power {
32 label = "r6350:green:power";
33 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
34 };
35
36 usb {
37 label = "r6350:green:usb";
38 gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
39 trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
40 linux,default-trigger = "usbport";
41 };
42
43 internet {
44 label = "r6350:green:wan";
45 gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
46 };
47
48 wifi {
49 label = "r6350:green:wifi";
50 gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
51 };
52 };
53
54 gpio-keys-polled {
55 compatible = "gpio-keys-polled";
56 poll-interval = <20>;
57
58 wps {
59 label = "wps";
60 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
61 linux,code = <KEY_WPS_BUTTON>;
62 };
63
64 reset {
65 label = "reset";
66 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_RESTART>;
68 };
69 };
70
71 gpio_export {
72 compatible = "gpio-export";
73 #size-cells = <0>;
74
75 usbpower {
76 gpio-export,name = "usbpower";
77 gpio-export,output = <1>;
78 gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
79 };
80 };
81 };
82
83 &nand {
84 status = "okay";
85
86 partitions {
87 compatible = "fixed-partitions";
88 #address-cells = <1>;
89 #size-cells = <1>;
90
91 partition@0 {
92 label = "u-boot";
93 reg = <0x0 0x100000>;
94 read-only;
95 };
96
97 partition@100000 {
98 label = "SC PART_MAP";
99 reg = <0x100000 0x100000>;
100 read-only;
101 };
102
103 partition@200000 {
104 label = "kernel";
105 reg = <0x200000 0x400000>;
106 };
107
108 partition@600000 {
109 label = "ubi";
110 reg = <0x600000 0x2800000>;
111 };
112
113 partition@2e00000 {
114 label = "reserved0";
115 reg = <0x2e00000 0x1800000>;
116 read-only;
117 };
118
119 factory: partition@4600000 {
120 label = "factory";
121 reg = <0x4600000 0x200000>;
122 read-only;
123 };
124
125 partition@4800000 {
126 label = "reserved1";
127 reg = <0x4800000 0x3800000>;
128 read-only;
129 };
130 };
131 };
132
133 &pcie {
134 status = "okay";
135 };
136
137 &pcie1 {
138 wifi@0,0 {
139 reg = <0x0 0 0 0 0>;
140 mediatek,mtd-eeprom = <&factory 0x0>;
141 ieee80211-freq-limit = <2400000 2500000>;
142 };
143 };
144
145 &ethernet {
146 mtd-mac-address = <&factory 0x4>;
147 };
148
149 &pinctrl {
150 state_default: pinctrl0 {
151 gpio {
152 ralink,group = "uart3", "uart2", "jtag", "wdt";
153 ralink,function = "gpio";
154 };
155 };
156 };