target/linux/ramips/dts/RAK633.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7628an.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
  11         model = "Rakwireless RAK633";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x4000000>;
  16         };
  17
  18         leds {
  19                 compatible = "gpio-leds";
  20
  21                 wifi {
  22                         label = "rak633:blue:wifi";
  23                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  24                 };
  25         };
  26 };
  27
  28 &pinctrl {
  29         state_default: pinctrl0 {
  30                 wled_an {
  31                         ralink,group = "wled_an";
  32                         ralink,function = "gpio";
  33                 };
  34         };
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         flash@0 {
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <10000000>;
  44
  45                 partitions {
  46                         compatible = "fixed-partitions";
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49
  50                         partition@0 {
  51                                 label = "u-boot";
  52                                 reg = <0x0 0x30000>;
  53                                 read-only;
  54                         };
  55
  56                         partition@30000 {
  57                                 label = "u-boot-env";
  58                                 reg = <0x30000 0x10000>;
  59                                 read-only;
  60                         };
  61
  62                         factory: partition@40000 {
  63                                 label = "factory";
  64                                 reg = <0x40000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@50000 {
  69                                 compatible = "denx,uimage";
  70                                 label = "firmware";
  71                                 reg = <0x50000 0x7b0000>;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &i2c {
  78         status = "okay";
  79 };
  80
  81 &i2s {
  82         status = "okay";
  83 };
  84
  85 &uart1 {
  86         status = "okay";
  87 };
  88
  89 &uart2 {
  90         status = "okay";
  91 };
  92
  93 &gdma {
  94         status = "okay";
  95 };
  96
  97 &ethernet {
  98         mtd-mac-address = <&factory 0x28>;
  99 };
 100
 101 &wmac {
 102         status = "okay";
 103         ralink,mtd-eeprom = <&factory 0x4>;
 104 };