ramips: add support for Rakwireless RAK633
[openwrt/openwrt.git] / target / linux / ramips / dts / RAK633.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7628an.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 compatible = "rakwireless,rak633", "mediatek,mt7628an-soc";
11 model = "Rakwireless RAK633";
12
13 memory@0 {
14 device_type = "memory";
15 reg = <0x0 0x4000000>;
16 };
17
18 leds {
19 compatible = "gpio-leds";
20
21 wifi {
22 label = "rak633:blue:wifi";
23 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
24 };
25 };
26 };
27
28 &pinctrl {
29 state_default: pinctrl0 {
30 wled_an {
31 ralink,group = "wled_an";
32 ralink,function = "gpio";
33 };
34 };
35 };
36
37 &spi0 {
38 status = "okay";
39
40 flash@0 {
41 compatible = "jedec,spi-nor";
42 reg = <0>;
43 spi-max-frequency = <10000000>;
44
45 partitions {
46 compatible = "fixed-partitions";
47 #address-cells = <1>;
48 #size-cells = <1>;
49
50 partition@0 {
51 label = "u-boot";
52 reg = <0x0 0x30000>;
53 read-only;
54 };
55
56 partition@30000 {
57 label = "u-boot-env";
58 reg = <0x30000 0x10000>;
59 read-only;
60 };
61
62 factory: partition@40000 {
63 label = "factory";
64 reg = <0x40000 0x10000>;
65 read-only;
66 };
67
68 partition@50000 {
69 compatible = "denx,uimage";
70 label = "firmware";
71 reg = <0x50000 0x7b0000>;
72 };
73 };
74 };
75 };
76
77 &i2c {
78 status = "okay";
79 };
80
81 &i2s {
82 status = "okay";
83 };
84
85 &uart1 {
86 status = "okay";
87 };
88
89 &uart2 {
90 status = "okay";
91 };
92
93 &gdma {
94 status = "okay";
95 };
96
97 &ethernet {
98 mtd-mac-address = <&factory 0x28>;
99 };
100
101 &wmac {
102 status = "okay";
103 ralink,mtd-eeprom = <&factory 0x4>;
104 };