target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "asus,rt-n10-plus", "ralink,rt3050-soc";
  10         model = "Asus RT-N10+";
  11
  12         aliases {
  13                 led-status = &led_wps;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "devdata";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         devconf: partition@40000 {
  40                                 label = "devconf";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@50000 {
  46                                 label = "firmware";
  47                                 reg = <0x50000 0x3b0000>;
  48                         };
  49                 };
  50         };
  51
  52         gpio-leds {
  53                 compatible = "gpio-leds";
  54
  55                 led_wps: wps {
  56                         label = "rt-n10-plus:green:wps";
  57                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         gpio-keys-polled {
  62                 compatible = "gpio-keys-polled";
  63                 poll-interval = <20>;
  64
  65                 reset {
  66                         label = "reset";
  67                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_RESTART>;
  69                 };
  70
  71                 wps {
  72                         label = "wps";
  73                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  74                         linux,code = <KEY_WPS_BUTTON>;
  75                 };
  76         };
  77 };
  78
  79 &ethernet {
  80         mtd-mac-address = <&devconf 0x4>;
  81 };
  82
  83 &esw {
  84         mediatek,portmap = <0x3e>;
  85 };
  86
  87 &wmac {
  88         ralink,mtd-eeprom = <&devconf 0>;
  89 };