target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
   7         model = "Asus RT-N10+";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12
  13                 bank-width = <2>;
  14                 device-width = <2>;
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17
  18                 partition@0 {
  19                         label = "u-boot";
  20                         reg = <0x0 0x30000>;
  21                         read-only;
  22                 };
  23
  24                 partition@30000 {
  25                         label = "devdata";
  26                         reg = <0x30000 0x10000>;
  27                         read-only;
  28                 };
  29
  30                 devconf: partition@40000 {
  31                         label = "devconf";
  32                         reg = <0x40000 0x10000>;
  33                         read-only;
  34                 };
  35
  36                 partition@50000 {
  37                         label = "firmware";
  38                         reg = <0x50000 0x3b0000>;
  39                 };
  40         };
  41
  42         ethernet@10100000 {
  43                 mtd-mac-address = <&devconf 0x4>;
  44         };
  45
  46         esw@10110000 {
  47                 ralink,portmap = <0x3e>;
  48         };
  49
  50         wmac@10180000 {
  51                 ralink,mtd-eeprom = <&devconf 0>;
  52         };
  53
  54         gpio-leds {
  55                 compatible = "gpio-leds";
  56                 wps {
  57                         label = "asus:green:wps";
  58                         gpios = <&gpio0 14 1>;
  59                 };
  60         };
  61
  62         gpio-keys-polled {
  63                 compatible = "gpio-keys-polled";
  64                 #address-cells = <1>;
  65                 #size-cells = <0>;
  66                 poll-interval = <20>;
  67                 reset {
  68                         label = "reset";
  69                         gpios = <&gpio0 10 1>;
  70                         linux,code = <0x198>;
  71                 };
  72                 wps {
  73                         label = "wps";
  74                         gpios = <&gpio0 0 1>;
  75                         linux,code = <0x211>;
  76                 };
  77         };
  78 };