target/linux/ramips/dts/RT-N13U.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-N13U", "ralink,rt3052-soc";
   7         model = "Asus RT-N13U";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x7b0000>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53                 power {
  54                         label = "rt-n13u:power";
  55                         gpios = <&gpio0 7 1>;
  56                 };
  57                 wifi {
  58                         label = "rt-n13u:wifi";
  59                         gpios = <&gpio0 8 1>;
  60                 };
  61         };
  62
  63         gpio-keys-polled {
  64                 compatible = "gpio-keys-polled";
  65                 #address-cells = <1>;
  66                 #size-cells = <0>;
  67                 poll-interval = <10>;
  68                 reset {
  69                         label = "reset";
  70                         gpios = <&gpio0 4 1>;
  71                         linux,code = <0x198>;
  72                 };
  73                 wps {
  74                         label = "wps";
  75                         gpios = <&gpio0 10 1>;
  76                         linux,code = <0x211>;
  77                 };
  78                 rfkill {
  79                         label = "rfkill";
  80                         gpios = <&gpio0 0 1>;
  81                         linux,code = <0xf7>;
  82                 };
  83         };
  84
  85         ethernet@10100000 {
  86                 mtd-mac-address = <&factory 0x28>;
  87         };
  88
  89         esw@10110000 {
  90                 ralink,portmap = <0x2f>;
  91         };
  92
  93         wmac@10180000 {
  94                 ralink,mtd-eeprom = <&factory 0>;
  95         };
  96
  97         otg@101c0000 {
  98                 status = "okay";
  99         };
 100 };