target/linux/ramips/dts/RTN56U.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3883.dtsi"
   4
   5 / {
   6         compatible = "RT-N56U", "ralink,rt3883-soc";
   7         model = "Asus RT-N56U";
   8
   9         palmbus@10000000 {
  10                 gpio1: gpio@638 {
  11                         status = "okay";
  12                 };
  13         };
  14
  15         pinctrl {
  16                 state_default: pinctrl0 {
  17                         gpio {
  18                                 ralink,group = "spi", "i2c", "jtag", "uartf";
  19                                 ralink,function = "gpio";
  20                         };
  21                 };
  22         };
  23
  24         ethernet@10100000 {
  25                 mtd-mac-address = <&factory 0x4>;
  26                 port@0 {
  27                         ralink,fixed-link = <1000 1 1 1>;
  28                 };
  29         };
  30
  31         pci@10140000 {
  32                 status = "okay";
  33
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&pci_pins>;
  36                 pci_pins: pci {
  37                         pci {
  38                                 ralink,group = "pci";
  39                                 ralink,function = "pci-fnc";
  40                         };
  41                 };
  42
  43                 host-bridge {
  44                         pci-bridge@1 {
  45                                 status = "okay";
  46                                 wmac@0,0 {
  47                                         compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
  48                                         reg = < 0x10000 0 0 0 0 >;
  49                                         ralink,eeprom = "rt2x00pci_1_0.eeprom";
  50                                 };
  51
  52                         };
  53                 };
  54         };
  55
  56         wmac@10180000 {
  57                 status = "okay";
  58                 ralink,2ghz = <0>;
  59                 ralink,mtd-eeprom = <&factory 0>;
  60         };
  61
  62         ehci@101c0000 {
  63                 status = "okay";
  64         };
  65
  66         ohci@101c1000 {
  67                 status = "okay";
  68         };
  69
  70         nor-flash@1c000000 {
  71                 compatible = "cfi-flash";
  72                 reg = <0x1c000000 0x800000>;
  73
  74                 bank-width = <2>;
  75                 #address-cells = <1>;
  76                 #size-cells = <1>;
  77
  78                 partition@0 {
  79                         reg = <0x0 0x0030000>;
  80                         label = "u-boot";
  81                         read-only;
  82                 };
  83
  84                 partition@30000 {
  85                         reg = <0x00030000 0x00010000>;
  86                         label = "u-boot-env";
  87                         read-only;
  88                 };
  89
  90                 factory: partition@40000 {
  91                         reg = <0x00040000 0x00010000>;
  92                         label = "factory";
  93                         read-only;
  94                 };
  95
  96                 partition@50000 {
  97                         reg = <0x00050000 0x007b0000>;
  98                         label = "firmware";
  99                 };
 100         };
 101
 102         rtl8367 {
 103                 compatible = "realtek,rtl8367";
 104                 gpio-sda = <&gpio0 1 0>;
 105                 gpio-sck = <&gpio0 2 0>;
 106                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
 107         };
 108
 109         gpio-keys-polled {
 110                 compatible = "gpio-keys-polled";
 111                 #address-cells = <1>;
 112                 #size-cells = <0>;
 113                 poll-interval = <100>;
 114                 reset {
 115                         label = "reset";
 116                         gpios = <&gpio0 13 1>;
 117                         linux,code = <0x198>;
 118                 };
 119                 wps {
 120                         label = "wps";
 121                         gpios = <&gpio1 2 1>;
 122                         linux,code = <0x211>;
 123                 };
 124         };
 125
 126         gpio-leds {
 127                 compatible = "gpio-leds";
 128
 129                 power {
 130                         label = "asus:blue:power";
 131                         gpios = <&gpio0 0 1>;
 132                 };
 133                 lan {
 134                         label = "asus:blue:lan";
 135                         gpios = <&gpio0 19 1>;
 136                 };
 137                 wan {
 138                         label = "asus:blue:wan";
 139                         gpios = <&gpio1 3 1>;
 140                 };
 141                 usb {
 142                         label = "asus:blue:usb";
 143                         gpios = <&gpio1 0 1>;
 144                 };
 145         };
 146 };