ramips: add support for TRENDnet TEW-638APB V2
[openwrt/openwrt.git] / target / linux / ramips / dts / TEW-638APB-V2.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
10 model = "TRENDnet TEW-638APB v2";
11
12 cfi@1f000000 {
13 compatible = "cfi-flash";
14 reg = <0x1f000000 0x400000>;
15 bank-width = <2>;
16 device-width = <2>;
17 #address-cells = <1>;
18 #size-cells = <1>;
19
20 partition@0 {
21 label = "u-boot";
22 reg = <0x0 0x30000>;
23 read-only;
24 };
25
26 partition@30000 {
27 label = "u-boot-env";
28 reg = <0x30000 0x10000>;
29 read-only;
30 };
31
32 factory: partition@40000 {
33 label = "factory";
34 reg = <0x40000 0x10000>;
35 read-only;
36 };
37
38 partition@50000 {
39 label = "firmware";
40 reg = <0x50000 0x3b0000>;
41 };
42 };
43
44 gpio-keys-polled {
45 compatible = "gpio-keys-polled";
46 #address-cells = <1>;
47 #size-cells = <0>;
48 poll-interval = <20>;
49
50 reset {
51 label = "reset";
52 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
53 linux,code = <KEY_RESTART>;
54 };
55
56 wps {
57 label = "wps";
58 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
59 linux,code = <KEY_WPS_BUTTON>;
60 };
61 };
62
63 gpio-leds {
64 compatible = "gpio-leds";
65
66 wps {
67 label = "tew-638apb-v2:orange:wps";
68 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
69 };
70
71 wps2 {
72 label = "tew-638apb-v2:green:wps";
73 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
74 };
75 };
76 };
77
78 &pinctrl {
79 state_default: pinctrl0 {
80 gpio {
81 ralink,group = "uartf";
82 ralink,function = "gpio";
83 };
84 };
85 };
86
87 &ethernet {
88 mtd-mac-address = <&factory 0x4>;
89 };
90
91 &esw {
92 mediatek,portmap = <0x2f>;
93 };
94
95 &wmac {
96 ralink,mtd-eeprom = <&factory 0>;
97 };