target/linux/ramips/dts/TEW-691GR.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "trendnet,tew-691gr", "ralink,rt3883-soc";
  10         model = "TRENDnet TEW-691GR";
  11
  12         aliases {
  13                 led-boot = &led_wps;
  14                 led-failsafe = &led_wps;
  15                 led-running = &led_wps;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         nor-flash@1c000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1c000000 0x800000>;
  22                 bank-width = <2>;
  23
  24                 partitions {
  25                         compatible = "fixed-partitions";
  26                         #address-cells = <1>;
  27                         #size-cells = <1>;
  28
  29                         partition@0 {
  30                                 reg = <0x0 0x0030000>;
  31                                 label = "u-boot";
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 reg = <0x00030000 0x00010000>;
  37                                 label = "u-boot-env";
  38                                 read-only;
  39                         };
  40
  41                         factory: partition@40000 {
  42                                 reg = <0x00040000 0x00010000>;
  43                                 label = "factory";
  44                                 read-only;
  45                         };
  46
  47                         partition@50000 {
  48                                 reg = <0x00050000 0x007b0000>;
  49                                 label = "firmware";
  50                         };
  51                 };
  52         };
  53
  54         gpio-keys-polled {
  55                 compatible = "gpio-keys-polled";
  56                 poll-interval = <100>;
  57
  58                 reset {
  59                         label = "reset";
  60                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  61                         linux,code = <KEY_RESTART>;
  62                 };
  63
  64                 wps {
  65                         label = "wps";
  66                         gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
  67                         linux,code = <KEY_WPS_BUTTON>;
  68                 };
  69
  70                 rfkill {
  71                         label = "rfkill";
  72                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_RFKILL>;
  74                 };
  75         };
  76
  77         gpio-leds {
  78                 compatible = "gpio-leds";
  79
  80                 led_wps: wps {
  81                         label = "tew-691gr:green:wps";
  82                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  83                 };
  84         };
  85 };
  86
  87 &gpio1 {
  88         status = "okay";
  89 };
  90
  91 &pinctrl {
  92         state_default: pinctrl0 {
  93                 gpio {
  94                         ralink,group = "spi", "i2c", "jtag", "uartf";
  95                         ralink,function = "gpio";
  96                 };
  97         };
  98 };
  99
 100 &ethernet {
 101         mtd-mac-address = <&factory 0x4>;
 102
 103         port@0 {
 104                 phy-handle = <&phy0>;
 105                 phy-mode = "rgmii";
 106         };
 107
 108         mdio-bus {
 109                 status = "okay";
 110
 111                 phy0: ethernet-phy@0 {
 112                         reg = <0>;
 113                         phy-mode = "rgmii";
 114                 };
 115         };
 116 };
 117
 118 &wmac {
 119         status = "okay";
 120         ralink,mtd-eeprom = <&factory 0x0>;
 121         ralink,5ghz = <0>;
 122         mtd-mac-address = <&factory 0x4>;
 123         mtd-mac-address-increment = <1>;
 124 };