1a56710e5217b7fd7b075291bc9ad952594866ea
[openwrt/openwrt.git] / target / linux / ramips / dts / TEW-692GR.dts
1 /dts-v1/;
2
3 #include "rt3883.dtsi"
4
5 / {
6 compatible = "TEW-692GR", "ralink,rt3883-soc";
7 model = "TRENDnet TEW-692GR";
8
9 nor-flash@1c000000 {
10 compatible = "cfi-flash";
11 reg = <0x1c000000 0x800000>;
12 bank-width = <2>;
13 #address-cells = <1>;
14 #size-cells = <1>;
15
16 partition@0 {
17 reg = <0x0 0x0030000>;
18 label = "u-boot";
19 read-only;
20 };
21
22 partition@30000 {
23 reg = <0x00030000 0x00010000>;
24 label = "u-boot-env";
25 read-only;
26 };
27
28 factory: partition@40000 {
29 reg = <0x00040000 0x00010000>;
30 label = "factory";
31 read-only;
32 };
33
34 partition@50000 {
35 reg = <0x00050000 0x007b0000>;
36 label = "firmware";
37 };
38 };
39
40 gpio-keys-polled {
41 compatible = "gpio-keys-polled";
42 #address-cells = <1>;
43 #size-cells = <0>;
44 poll-interval = <100>;
45
46 reset {
47 label = "reset";
48 gpios = <&gpio0 10 1>;
49 linux,code = <0x198>;
50 };
51
52 wps {
53 label = "wps";
54 gpios = <&gpio1 2 1>;
55 linux,code = <0x211>;
56 };
57 };
58
59 gpio-leds {
60 compatible = "gpio-leds";
61
62 wps {
63 label = "tew-692gr:orange:wps";
64 gpios = <&gpio0 9 1>;
65 };
66
67 wps2 {
68 label = "tew-692gr:green:wps";
69 gpios = <&gpio1 4 1>;
70 };
71 };
72 };
73
74 &gpio1 {
75 status = "okay";
76 };
77
78 &pinctrl {
79 state_default: pinctrl0 {
80 gpio {
81 ralink,group = "spi", "i2c", "jtag", "uartf";
82 ralink,function = "gpio";
83 };
84 };
85 };
86
87 &ethernet {
88 status = "okay";
89 mtd-mac-address = <&factory 0x4>;
90
91 port@0 {
92 phy-handle = <&phy0>;
93 phy-mode = "rgmii";
94 };
95
96 mdio-bus {
97 status = "okay";
98
99 phy0: ethernet-phy@0 {
100 reg = <0>;
101 phy-mode = "rgmii";
102
103 qca,ar8327-initvals = <
104 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
105 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
106 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
107 0x50 0xc437c437 /* LED Control Register 0 */
108 0x54 0xc337c337 /* LED Control Register 1 */
109 0x58 0x00000000 /* LED Control Register 2 */
110 0x5c 0x03ffff00 /* LED Control Register 3 */
111 0x7c 0x0000007e /* PORT0_STATUS */
112 0x94 0x0000007e /* PORT6 STATUS */
113 >;
114 };
115 };
116 };
117
118 &pci {
119 status = "okay";
120 pinctrl-names = "default";
121 pinctrl-0 = <&pci_pins>;
122
123 pci_pins: pci {
124 pci {
125 ralink,group = "pci";
126 ralink,function = "pci-fnc";
127 };
128 };
129
130 host-bridge {
131 pci-bridge@1 {
132 status = "okay";
133
134 wmac@0,0 {
135 compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
136 reg = < 0x10000 0 0 0 0 >;
137 ralink,2ghz = <0>;
138 };
139 };
140 };
141 };
142
143 &wmac {
144 status = "okay";
145 ralink,mtd-eeprom = <&factory 0x0>;
146 ralink,5ghz = <0>;
147 };