target/linux/ramips/dts/TEW-692GR.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 / {
   6         compatible = "TEW-692GR", "ralink,rt3883-soc";
   7         model = "TRENDnet TEW-692GR";
   8
   9         nor-flash@1c000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1c000000 0x800000>;
  12                 bank-width = <2>;
  13                 #address-cells = <1>;
  14                 #size-cells = <1>;
  15
  16                 partition@0 {
  17                         reg = <0x0 0x0030000>;
  18                         label = "u-boot";
  19                         read-only;
  20                 };
  21
  22                 partition@30000 {
  23                         reg = <0x00030000 0x00010000>;
  24                         label = "u-boot-env";
  25                         read-only;
  26                 };
  27
  28                 factory: partition@40000 {
  29                         reg = <0x00040000 0x00010000>;
  30                         label = "factory";
  31                         read-only;
  32                 };
  33
  34                 partition@50000 {
  35                         reg = <0x00050000 0x007b0000>;
  36                         label = "firmware";
  37                 };
  38         };
  39
  40         gpio-keys-polled {
  41                 compatible = "gpio-keys-polled";
  42                 #address-cells = <1>;
  43                 #size-cells = <0>;
  44                 poll-interval = <100>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 10 1>;
  49                         linux,code = <0x198>;
  50                 };
  51
  52                 wps {
  53                         label = "wps";
  54                         gpios = <&gpio1 2 1>;
  55                         linux,code = <0x211>;
  56                 };
  57         };
  58
  59         gpio-leds {
  60                 compatible = "gpio-leds";
  61
  62                 wps {
  63                         label = "tew-692gr:orange:wps";
  64                         gpios = <&gpio0 9 1>;
  65                 };
  66
  67                 wps2 {
  68                         label = "tew-692gr:green:wps";
  69                         gpios = <&gpio1 4 1>;
  70                 };
  71         };
  72 };
  73
  74 &gpio1 {
  75         status = "okay";
  76 };
  77
  78 &pinctrl {
  79         state_default: pinctrl0 {
  80                 gpio {
  81                         ralink,group = "spi", "i2c", "jtag", "uartf";
  82                         ralink,function = "gpio";
  83                 };
  84         };
  85 };
  86
  87 &ethernet {
  88         status = "okay";
  89         mtd-mac-address = <&factory 0x4>;
  90
  91         port@0 {
  92                 phy-handle = <&phy0>;
  93                 phy-mode = "rgmii";
  94         };
  95
  96         mdio-bus {
  97                 status = "okay";
  98
  99                 phy0: ethernet-phy@0 {
 100                         reg = <0>;
 101                         phy-mode = "rgmii";
 102
 103                         qca,ar8327-initvals = <
 104                                 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 105                                 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
 106                                 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
 107                                 0x50 0xc437c437 /* LED Control Register 0 */
 108                                 0x54 0xc337c337 /* LED Control Register 1 */
 109                                 0x58 0x00000000 /* LED Control Register 2 */
 110                                 0x5c 0x03ffff00 /* LED Control Register 3 */
 111                                 0x7c 0x0000007e /* PORT0_STATUS */
 112                                 0x94 0x0000007e /* PORT6 STATUS */
 113                         >;
 114                 };
 115         };
 116 };
 117
 118 &pci {
 119         status = "okay";
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&pci_pins>;
 122
 123         pci_pins: pci {
 124                 pci {
 125                         ralink,group = "pci";
 126                         ralink,function = "pci-fnc";
 127                 };
 128         };
 129
 130         host-bridge {
 131                 pci-bridge@1 {
 132                         status = "okay";
 133
 134                         wifi@0,0 {
 135                                 compatible = "pci0,0";
 136                                 reg = < 0x10000 0 0 0 0 >;
 137                                 ralink,2ghz = <0>;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &wmac {
 144         status = "okay";
 145         ralink,mtd-eeprom = <&factory 0x0>;
 146         ralink,5ghz = <0>;
 147         mtd-mac-address = <&factory 0x4>;
 148         mtd-mac-address-increment = <3>;
 149 };