target/linux/ramips/dts/TL-WR902ACV3.dts

   1 /dts-v1/;
   2
   3 #include "TPLINK-8M.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
  10         model = "TP-Link TL-WR902AC v3";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys-polled";
  21                 poll-interval = <20>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28
  29                 sw1 {
  30                         label = "sw1";
  31                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  32                         linux,code = <BTN_0>;
  33                 };
  34
  35                 sw2 {
  36                         label = "sw2";
  37                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  38                         linux,code = <BTN_1>;
  39                 };
  40
  41                 wps {
  42                         label = "wps";
  43                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  44                         linux,code = <KEY_WPS_BUTTON>;
  45                 };
  46         };
  47
  48         leds {
  49                 compatible = "gpio-leds";
  50
  51                 lan {
  52                         label = "tl-wr902ac-v3:green:lan";
  53                         gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 led_power: power {
  57                         label = "tl-wr902ac-v3:green:power";
  58                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 usb {
  62                         label = "tl-wr902ac-v3:green:usb";
  63                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  64                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  65                         linux,default-trigger = "usbport";
  66                 };
  67
  68                 wan {
  69                         label = "tl-wr902ac-v3:green:wan";
  70                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 wlan {
  74                         label = "tl-wr902ac-v3:green:wlan";
  75                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 wps {
  79                         label = "tl-wr902ac-v3:green:wps";
  80                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83 };
  84
  85 &pinctrl {
  86         state_default: pinctrl0 {
  87                 gpio {
  88                         ralink,group = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
  89                         ralink,function = "gpio";
  90                 };
  91         };
  92 };
  93
  94 &ehci {
  95         status = "okay";
  96 };
  97
  98 &ohci {
  99         status = "okay";
 100 };
 101
 102 &pcie {
 103         status = "okay";
 104 };
 105
 106 &pcie0 {
 107         mt76@0,0 {
 108                 reg = <0x0000 0 0 0 0>;
 109                 mediatek,mtd-eeprom = <&factory 0x28000>;
 110                 ieee80211-freq-limit = <5000000 6000000>;
 111                 mtd-mac-address = <&factory 0xf100>;
 112                 mtd-mac-address-increment = <(-1)>;
 113         };
 114 };