target/linux/ramips/dts/Timecloud.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "thunder,timecloud", "mediatek,mt7621-soc";
  10         model = "Thunder Timecloud";
  11
  12         memory@0 {
  13                 device_type = "memory";
  14                 reg = <0x0 0x10000000>;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200";
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23
  24                 statw {
  25                         label = "timecloud:white:status";
  26                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  27                 };
  28
  29                 stato {
  30                         label = "timecloud:orange:status";
  31                         gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
  32                 };
  33
  34         };
  35
  36         gpio-keys-polled {
  37                 compatible = "gpio-keys-polled";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40                 poll-interval = <20>;
  41
  42                 reset {
  43                         label = "reset";
  44                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_RESTART>;
  46                 };
  47
  48                 BTN_0 {
  49                         label = "BTN_0";
  50                         gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
  51                         linux,code = <BTN_0>;
  52                 };
  53         };
  54 };
  55
  56 &sdhci {
  57         status = "okay";
  58
  59         pinctrl-names = "default";
  60         pinctrl-0 = <&sdhci_pins>;
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         m25p80@0 {
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69                 compatible = "jedec,spi-nor";
  70                 reg = <0>;
  71                 spi-max-frequency = <10000000>;
  72                 m25p,chunked-io = <32>;
  73
  74                 partition@0 {
  75                         label = "u-boot";
  76                         reg = <0x0 0x30000>;
  77                         read-only;
  78                 };
  79
  80                 partition@30000 {
  81                         label = "u-boot-env";
  82                         reg = <0x30000 0x10000>;
  83                         read-only;
  84                 };
  85
  86                 factory: partition@40000 {
  87                         label = "factory";
  88                         reg = <0x40000 0x10000>;
  89                         read-only;
  90                 };
  91
  92                 partition@50000 {
  93                         label = "firmware";
  94                         reg = <0x50000 0xfb0000>;
  95                 };
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&factory 0xe000>;
 101 };
 102
 103 &pinctrl {
 104         state_default: pinctrl0 {
 105                 gpio {
 106                         ralink,group = "i2c", "uart2", "jtag";
 107                         ralink,function = "gpio";
 108                 };
 109         };
 110 };