target/linux/ramips/dts/Timecloud.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   9         model = "Thunder Timecloud";
  10
  11         memory@0 {
  12                 device_type = "memory";
  13                 reg = <0x0 0x10000000>;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 statw {
  24                         label = "timecloud:white:status";
  25                         gpios = <&gpio0 7 0>;
  26                 };
  27
  28                 stato {
  29                         label = "timecloud:orange:status";
  30                         gpios = <&gpio0 8 0>;
  31                 };
  32
  33         };
  34
  35         gpio-keys-polled {
  36                 compatible = "gpio-keys-polled";
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 poll-interval = <20>;
  40
  41                 reset {
  42                         label = "reset";
  43                         gpios = <&gpio0 13 1>;
  44                         linux,code = <KEY_RESTART>;
  45                 };
  46
  47                 BTN_0 {
  48                         label = "BTN_0";
  49                         gpios = <&gpio0 4 1>;
  50                         linux,code = <BTN_0>;
  51                 };
  52         };
  53 };
  54
  55 &sdhci {
  56         status = "okay";
  57         pinctrl-names = "default";
  58         pinctrl-0 = <&sdhci_pins>;
  59 };
  60
  61 &xhci {
  62         status = "okay";
  63 };
  64
  65 &spi0 {
  66         status = "okay";
  67
  68         m25p80@0 {
  69                 #address-cells = <1>;
  70                 #size-cells = <1>;
  71                 compatible = "jedec,spi-nor";
  72                 reg = <0>;
  73                 linux,modalias = "m25p80";
  74                 spi-max-frequency = <10000000>;
  75
  76                 partition@0 {
  77                         label = "u-boot";
  78                         reg = <0x0 0x30000>;
  79                         read-only;
  80                 };
  81
  82                 partition@30000 {
  83                         label = "u-boot-env";
  84                         reg = <0x30000 0x10000>;
  85                         read-only;
  86                 };
  87
  88                 factory: partition@40000 {
  89                         label = "factory";
  90                         reg = <0x40000 0x10000>;
  91                         read-only;
  92                 };
  93
  94                 partition@50000 {
  95                         label = "firmware";
  96                         reg = <0x50000 0xfb0000>;
  97                 };
  98         };
  99 };
 100
 101 &ethernet {
 102         mtd-mac-address = <&factory 0xe000>;
 103 };
 104
 105 &pinctrl {
 106         state_default: pinctrl0 {
 107                 gpio {
 108                         ralink,group = "i2c", "uart2", "jtag";
 109                         ralink,function = "gpio";
 110                 };
 111         };
 112 };