target/linux/ramips/dts/UR-326N4G.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "upvel,ur-326n4g", "ralink,rt3052-soc";
  10         model = "UPVEL UR-326N4G";
  11
  12         aliases {
  13                 led-status = &led_wps;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 label = "factory";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@50000 {
  46                                 label = "firmware";
  47                                 reg = <0x50000 0x3b0000>;
  48                         };
  49                 };
  50         };
  51
  52         gpio-leds {
  53                 compatible = "gpio-leds";
  54
  55                 3g {
  56                         label = "ur-326n4g:green:3g";
  57                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 gateway {
  61                         label = "ur-326n4g:green:gateway";
  62                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 ap {
  66                         label = "ur-326n4g:green:ap";
  67                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 led_wps: wps {
  71                         label = "ur-326n4g:green:wps";
  72                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 station {
  76                         label = "ur-326n4g:green:station";
  77                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80
  81         gpio-keys-polled {
  82                 compatible = "gpio-keys-polled";
  83                 poll-interval = <20>;
  84
  85                 reset_wps {
  86                         label = "reset_wps";
  87                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  88                         linux,code = <KEY_RESTART>;
  89                 };
  90
  91                 mode {
  92                         label = "mode";
  93                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  94                         linux,code = <BTN_0>;
  95                 };
  96         };
  97 };
  98
  99 &pinctrl {
 100         state_default: pinctrl0 {
 101                 gpio {
 102                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 103                         ralink,function = "gpio";
 104                 };
 105         };
 106 };
 107
 108 &ethernet {
 109         mtd-mac-address = <&factory 0x4004>;
 110 };
 111
 112 &esw {
 113         mediatek,portmap = <0x2f>;
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0>;
 118 };
 119
 120 &otg {
 121         status = "okay";
 122 };