target/linux/ramips/dts/VOCORE2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "vocore,vocore2", "mediatek,mt7628an-soc";
  10         model = "VoCore2";
  11
  12         chosen {
  13                 bootargs = "console=ttyS2,115200";
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x8000000>;
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23
  24                 status {
  25                         label = "vocore2:fuchsia:status";
  26                         gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
  27                 };
  28         };
  29 };
  30
  31 &pinctrl {
  32         state_default: pinctrl0 {
  33                 gpio {
  34                         ralink,group = "wled_an", "perst", "wdt";
  35                         ralink,function = "gpio";
  36                 };
  37         };
  38 };
  39
  40 &wmac {
  41         status = "okay";
  42         ralink,mtd-eeprom = <&factory 0x4>;
  43 };
  44
  45 &spi0 {
  46         status = "okay";
  47
  48         m25p80@0 {
  49                 #address-cells = <1>;
  50                 #size-cells = <1>;
  51                 compatible = "jedec,spi-nor";
  52                 reg = <0>;
  53                 spi-max-frequency = <10000000>;
  54                 m25p,chunked-io = <32>;
  55
  56                 partition@0 {
  57                         label = "u-boot";
  58                         reg = <0x0 0x30000>;
  59                         read-only;
  60                 };
  61
  62                 partition@30000 {
  63                         label = "u-boot-env";
  64                         reg = <0x30000 0x10000>;
  65                         read-only;
  66                 };
  67
  68                 factory: partition@40000 {
  69                         label = "factory";
  70                         reg = <0x40000 0x10000>;
  71                         read-only;
  72                 };
  73
  74                 partition@50000 {
  75                         label = "firmware";
  76                         reg = <0x50000 0xfb0000>;
  77                 };
  78         };
  79 };
  80
  81 &esw {
  82         mediatek,portmap = <0x7>;
  83         mediatek,portdisable = <0x3a>;
  84 };
  85
  86 &i2s {
  87         status = "okay";
  88 };
  89
  90 &gdma {
  91         status = "okay";
  92 };
  93
  94 &pwm {
  95         status = "okay";
  96 };
  97
  98 &uart1 {
  99         status = "okay";
 100 };
 101
 102 &uart2 {
 103         status = "okay";
 104 };