target/linux/ramips/dts/WHR-1166D.dts

   1 /dts-v1/;
   2
   3 /include/ "mt7620a.dtsi"
   4
   5 / {
   6         compatible = "ralink,mt7620a-soc";
   7         model = "Buffalo WHR-1166D";
   8
   9         palmbus@10000000 {
  10                 gpio2: gpio@660 {
  11                         status = "okay";
  12                 };
  13
  14                 spi@b00 {
  15                         status = "okay";
  16
  17                         m25p80@0 {
  18                                 #address-cells = <1>;
  19                                 #size-cells = <1>;
  20                                 compatible = "en25q64";
  21                                 reg = <0 0>;
  22                                 linux,modalias = "m25p80", "mx25l6405d";
  23                                 spi-max-frequency = <10000000>;
  24
  25                                 partition@0 {
  26                                         label = "u-boot";
  27                                         reg = <0x0 0x30000>;
  28                                         read-only;
  29                                 };
  30
  31                                 partition@30000 {
  32                                         label = "u-boot-env";
  33                                         reg = <0x30000 0x10000>;
  34                                         read-only;
  35                                 };
  36
  37                                 factory: partition@40000 {
  38                                         label = "factory";
  39                                         reg = <0x40000 0x10000>;
  40                                         read-only;
  41                                 };
  42
  43                                 partition@50000 {
  44                                         label = "firmware";
  45                                         reg = <0x50000 0xfb0000>;
  46                                 };
  47                         };
  48                 };
  49         };
  50
  51         pinctrl {
  52                 state_default: pinctrl0 {
  53                         gpio {
  54                                 ralink,group = "i2c", "uartf", "wled", "nd_sd";
  55                                 ralink,function = "gpio";
  56                         };
  57                 };
  58         };
  59
  60         ethernet@10100000 {
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&rgmii1_pins &mdio_pins>;
  63
  64                 port@5 {
  65                         status = "okay";
  66                         phy-handle = <&phy5>;
  67                         phy-mode = "rgmii";
  68                 };
  69
  70                 mdio-bus {
  71                         status = "okay";
  72
  73                         phy5: ethernet-phy@5 {
  74                                 reg = <5>;
  75                                 phy-mode = "rgmii";
  76                         };
  77                 };
  78         };
  79
  80         gsw@10110000 {
  81                 ralink,port4 = "ephy";
  82         };
  83
  84         wmac@10180000 {
  85                 ralink,mtd-eeprom = <&factory 0>;
  86         };
  87
  88         pcie@10140000 {
  89                 status = "okay";
  90
  91                 pcie-bridge {
  92                         mt76@0,0 {
  93                                 reg = <0x0000 0 0 0 0>;
  94                                 device_type = "pci";
  95                                 mediatek,mtd-eeprom = <&factory 32768>;
  96                                 mediatek,2ghz = <0>;
  97                         };
  98                 };
  99         };
 100
 101         gpio-leds {
 102                 compatible = "gpio-leds";
 103                 power {
 104                         label = "buffalo:red:power";
 105                         gpios = <&gpio0 7 1>;
 106                 };
 107                 status {
 108                         label = "buffalo:green:status";
 109                         gpios = <&gpio0 8 1>;
 110                 };
 111                 power2 {
 112                         label = "buffalo:green:power";
 113                         gpios = <&gpio0 9 1>;
 114                 };
 115                 status2 {
 116                         label = "buffalo:orange:status";
 117                         gpios = <&gpio0 10 1>;
 118                 };
 119                 internet {
 120                         label = "buffalo:green:internet";
 121                         gpios = <&gpio2 17 1>;
 122                 };
 123                 router {
 124                         label = "buffalo:green:router";
 125                         gpios = <&gpio2 18 1>;
 126                 };
 127                 router2 {
 128                         label = "buffalo:orange:router";
 129                         gpios = <&gpio2 19 1>;
 130                 };
 131         };
 132
 133         gpio-keys-polled {
 134                 compatible = "gpio-keys-polled";
 135                 #address-cells = <1>;
 136                 #size-cells = <0>;
 137                 poll-interval = <20>;
 138                 s1 {
 139                         label = "reset";
 140                         gpios = <&gpio2 12 1>;
 141                         linux,code = <0x100>;
 142                 };
 143                 s2 {
 144                         label = "aoss";
 145                         gpios = <&gpio2 13 1>;
 146                         linux,code = <0x101>;
 147                 };
 148                 s3 {
 149                         label = "ap";
 150                         gpios = <&gpio2 14 1>;
 151                         linux,code = <0x102>;
 152                 };
 153                 s4 {
 154                         label = "bridge";
 155                         gpios = <&gpio2 15 1>;
 156                         linux,code = <0x103>;
 157                 };
 158         };
 159 };