target/linux/ramips/dts/WHR-G300N.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WHR-G300N", "ralink,rt3052-soc";
   7         model = "Buffalo WHR-G300N";
   8
   9         memorydetect {
  10                 ralink,memory = <0x0 0x200000 0x4000000>;
  11         };
  12
  13         palmbus@10000000 {
  14                 sysc@0 {
  15                         ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
  16                         ralink,uartmux = "gpio";
  17                         ralink,wdtmux = <1>;
  18                 };
  19
  20                 gpio0: gpio@600 {
  21                         status = "okay";
  22                 };
  23         };
  24
  25         cfi@1f000000 {
  26                 compatible = "cfi-flash";
  27                 reg = <0x1f000000 0x800000>;
  28
  29                 bank-width = <2>;
  30                 device-width = <2>;
  31                 #address-cells = <1>;
  32                 #size-cells = <1>;
  33         };
  34
  35         ethernet@10100000 {
  36                 status = "okay";
  37         };
  38
  39         esw@10110000 {
  40                 status = "okay";
  41                 ralink,portmap = <0x2f>;
  42         };
  43
  44         gpio-leds {
  45                 compatible = "gpio-leds";
  46                 diag {
  47                         label = "whr-g300n:red:diag";
  48                         gpios = <&gpio0 7 1>;
  49                 };
  50                 router {
  51                         label = "whr-g300n:green:router";
  52                         gpios = <&gpio0 9 1>;
  53                 };
  54                 security {
  55                         label = "whr-g300n:amber:security";
  56                         gpios = <&gpio0 14 1>;
  57                 };
  58         };
  59
  60         gpio-keys-polled {
  61                 compatible = "gpio-keys-polled";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 poll-interval = <20>;
  65                 reset {
  66                         label = "reset";
  67                         gpios = <&gpio0 10 1>;
  68                         linux,code = <0x198>;
  69                 };
  70                 aoss {
  71                         label = "aoss";
  72                         gpios = <&gpio0 0 1>;
  73                         linux,code = <0x211>;
  74                 };
  75                 router-off {
  76                         label = "router-off";
  77                         gpios = <&gpio0 11 1>;
  78                         linux,code = <0x102>;
  79                 };
  80                 router-on {
  81                         label = "router-on";
  82                         gpios = <&gpio0 8 1>;
  83                         linux,code = <0x103>;
  84                 };
  85         };
  86
  87         wmac@10180000 {
  88                 status = "okay";
  89         };
  90 };