target/linux/ramips/dts/WL-341V3.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "sitecom,wl-341-v3", "ralink,rt3052-soc";
  10         model = "Sitecom WL-341 v3";
  11
  12         cfi@1f000000 {
  13                 compatible = "cfi-flash";
  14                 reg = <0x1f000000 0x800000>;
  15                 bank-width = <2>;
  16                 device-width = <2>;
  17
  18                 partitions {
  19                         compatible = "fixed-partitions";
  20                         #address-cells = <1>;
  21                         #size-cells = <1>;
  22
  23                         partition@0 {
  24                                 label = "u-boot";
  25                                 reg = <0x0 0x20000>;
  26                                 read-only;
  27                         };
  28
  29                         boardnvram: partition@20000 {
  30                                 label = "board-nvram";
  31                                 reg = <0x20000 0x10000>;
  32                                 read-only;
  33                         };
  34
  35                         partition@30000 {
  36                                 label = "u-boot-env";
  37                                 reg = <0x30000 0x10000>;
  38                                 read-only;
  39                         };
  40
  41                         partition@40000 {
  42                                 label = "firmware";
  43                                 reg = <0x40000 0x3b0000>;
  44                         };
  45                 };
  46         };
  47
  48         gpio-leds {
  49                 compatible = "gpio-leds";
  50
  51                 first {
  52                         label = "wl-341v3:amber:first";
  53                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 first2 {
  57                         label = "wl-341v3:blue:first";
  58                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 third {
  62                         label = "wl-341v3:amber:third";
  63                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 third2 {
  67                         label = "wl-341v3:blue:third";
  68                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 fourth {
  72                         label = "wl-341v3:blue:fourth";
  73                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 fifth {
  77                         label = "wl-341v3:amber:fifth";
  78                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 fifth2 {
  82                         label = "wl-341v3:blue:fifth";
  83                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  84                 };
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 poll-interval = <20>;
  90
  91                 reset {
  92                         label = "reset";
  93                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  94                         linux,code = <KEY_RESTART>;
  95                 };
  96
  97                 wps {
  98                         label = "wps";
  99                         gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_WPS_BUTTON>;
 101                 };
 102         };
 103 };
 104
 105 &pinctrl {
 106         state_default: pinctrl0 {
 107                 gpio {
 108                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 109                         ralink,function = "gpio";
 110                 };
 111         };
 112 };
 113
 114 &ethernet {
 115         mtd-mac-address = <&boardnvram 0xffa0>;
 116 };
 117
 118 &esw {
 119         mediatek,portmap = <0x3e>;
 120 };
 121
 122 &wmac {
 123         ralink,mtd-eeprom = <&boardnvram 0xfd70>;
 124 };
 125
 126 &otg {
 127         status = "okay";
 128 };