target/linux/ramips/dts/WL-351.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WL-351", "ralink,rt3052-soc";
   7         model = "Sitecom WL-351 v1 002";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x800000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x3b0000>;
  48                 };
  49         };
  50
  51         ethernet@10100000 {
  52                 mtd-mac-address = <&factory 0x4>;
  53         };
  54
  55         esw@10110000 {
  56                 ralink,portmap = <0x3f>;
  57                 ralink,fct2 = <0x0002500c>;
  58                 /*
  59                  * ext phy base addr 31, rx/tx clock skew 0,
  60                  * turbo mii off, rgmi 3.3v off, port 5 polling off
  61                  * port5: enabled, gige, full-duplex, rx/tx-flow-control
  62                  * port6: enabled, gige, full-duplex, rx/tx-flow-control
  63                 */
  64                 ralink,fpa2 = <0x1f003fff>;
  65         };
  66
  67         otg@101c0000 {
  68                 status = "okay";
  69         };
  70
  71         gpio-leds {
  72                 compatible = "gpio-leds";
  73                 power {
  74                         label = "wl-351:amber:power";
  75                         gpios = <&gpio0 8 1>;
  76                 };
  77                 unpopulated {
  78                         label = "wl-351:amber:unpopulated";
  79                         gpios = <&gpio0 12 1>;
  80                 };
  81                 unpopulated2 {
  82                         label = "wl-351:blue:unpopulated";
  83                         gpios = <&gpio0 13 1>;
  84                 };
  85         };
  86
  87         gpio-keys-polled {
  88                 compatible = "gpio-keys-polled";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 poll-interval = <20>;
  92                 reset {
  93                         label = "reset";
  94                         gpios = <&gpio0 10 1>;
  95                         linux,code = <0x198>;
  96                 };
  97                 wps {
  98                         label = "wps";
  99                         gpios = <&gpio0 0 1>;
 100                         linux,code = <0x211>;
 101                 };
 102         };
 103
 104         rtl8366rb {
 105                 compatible = "rtl8367rb";
 106                 gpio-sda = <&gpio0 1 0>;
 107                 gpio-sck = <&gpio0 2 0>;
 108         };
 109 };