a07490b8535855b793108a4781813c809d526823
[openwrt/openwrt.git] / target / linux / ramips / dts / WL-WN570HA1.dts
1 /dts-v1/;
2 #include <dt-bindings/input/input.h>
3 #include <dt-bindings/gpio/gpio.h>
4
5 #include "mt7628an.dtsi"
6
7 / {
8 compatible = "wavlink,wl-wn570ha1", "mediatek,mt7628an-soc";
9 model = "Wavlink WL-WN570HA1";
10
11 chosen {
12 bootargs = "console=ttyS0,57600";
13 };
14
15 memory@0 {
16 device_type = "memory";
17 reg = <0x0 0x4000000>;
18 };
19
20 keys {
21 compatible = "gpio-keys-polled";
22 poll-interval = <20>;
23
24 reset {
25 label = "reset";
26 gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
27 linux,code = <KEY_RESTART>;
28 };
29 };
30
31 leds {
32 compatible = "gpio-leds";
33
34 power {
35 label = "wl-wn570ha1:green:power";
36 gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
37 default-state = "keep";
38 };
39
40 wan {
41 label = "wl-wn570ha1:green:wan";
42 gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
43 };
44
45 wifi-high {
46 label = "wl-wn570ha1:green:wifi-high";
47 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
48 };
49
50 wifi-med {
51 label = "wl-wn570ha1:green:wifi-med";
52 gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
53 };
54
55 wifi-low {
56 label = "wl-wn570ha1:green:wifi-low";
57 gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
58 };
59
60 wifi {
61 label = "wl-wn570ha1:green:wifi";
62 gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
63 };
64 };
65 };
66
67 &pinctrl {
68 state_default: pinctrl0 {
69 gpio {
70 ralink,group = "i2c", "wled_an", "p0led_an", "wdt", "refclk";
71 ralink,function = "gpio";
72 };
73 };
74 };
75
76 &pcie {
77 status = "okay";
78 };
79
80 &pcie0 {
81 wifi@0,0 {
82 reg = <0x0000 0 0 0 0>;
83 mediatek,mtd-eeprom = <&factory 0x8000>;
84 ieee80211-freq-limit = <5000000 6000000>;
85 };
86 };
87
88 &spi0 {
89 status = "okay";
90
91 flash@0 {
92 compatible = "jedec,spi-nor";
93 reg = <0>;
94 spi-max-frequency = <10000000>;
95
96 partitions {
97 compatible = "fixed-partitions";
98 #address-cells = <1>;
99 #size-cells = <1>;
100
101 partition@0 {
102 label = "u-boot";
103 reg = <0x0 0x30000>;
104 read-only;
105 };
106
107 partition@30000 {
108 label = "u-boot-env";
109 reg = <0x30000 0x10000>;
110 read-only;
111 };
112
113 factory: partition@40000 {
114 label = "factory";
115 reg = <0x40000 0x10000>;
116 read-only;
117 };
118
119 partition@50000 {
120 compatible = "denx,uimage";
121 label = "firmware";
122 reg = <0x50000 0x7b0000>;
123 };
124 };
125 };
126 };
127
128 &wmac {
129 status = "okay";
130 };
131
132 &ethernet {
133 mtd-mac-address = <&factory 0x2e>;
134 mediatek,portmap = "llllw";
135 };