9d9b222bd7a85cb3fdb74da72edb64c20031bf23
[openwrt/openwrt.git] / target / linux / ramips / dts / WLI-TX4-AG300N.dts
1 /dts-v1/;
2
3 #include "rt2880.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8 #address-cells = <1>;
9 #size-cells = <1>;
10 compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
11 model = "Buffalo WLI-TX4-AG300N";
12
13 cfi@1f000000 {
14 compatible = "cfi-flash";
15 reg = <0x1f000000 0x800000>;
16 bank-width = <2>;
17 device-width = <2>;
18 #address-cells = <1>;
19 #size-cells = <1>;
20
21 partition@0 {
22 label = "uboot";
23 reg = <0x0 0x30000>;
24 read-only;
25 };
26
27 partition@30000 {
28 label = "uboot-env";
29 reg = <0x30000 0x10000>;
30 read-only;
31 };
32
33 factory: partition@40000 {
34 label = "factory";
35 reg = <0x40000 0x10000>;
36 read-only;
37 };
38
39 partition@50000 {
40 label = "linux";
41 reg = <0x50000 0x3b0000>;
42 };
43 };
44
45 gpio-keys-polled {
46 compatible = "gpio-keys-polled";
47 #address-cells = <1>;
48 #size-cells = <0>;
49 poll-interval = <100>;
50
51 wps {
52 label = "wps";
53 gpios = <&gpio0 0 1>;
54 linux,code = <KEY_WPS_BUTTON>;
55 };
56
57 bandwidth {
58 label = "bandwidth";
59 gpios = <&gpio0 8 0>;
60 linux,code = <KEY_RESTART>;
61 };
62
63 reset {
64 label = "reset";
65 gpios = <&gpio0 9 1>;
66 linux,code = <KEY_RESTART>;
67 };
68 };
69
70 gpio-leds {
71 compatible = "gpio-leds";
72
73 diag {
74 label = "wli-tx4-ag300n:red:diag";
75 gpios = <&gpio0 10 1>;
76 };
77
78 power {
79 label = "wli-tx4-ag300n:blue:power";
80 gpios = <&gpio0 12 1>;
81 };
82
83 security {
84 label = "wli-tx4-ag300n:blue:security";
85 gpios = <&gpio0 13 1>;
86 };
87 };
88 };
89
90 &gpio0 {
91 status = "okay";
92 };
93
94 &ethernet {
95 status = "okay";
96 mtd-mac-address = <&factory 0x4>;
97
98 port@0 {
99 mediatek,fixed-link = <1000 1 1 1>;
100 };
101 };
102
103 &wmac {
104 ralink,mtd-eeprom = <&factory 0>;
105 };