ramips: enable external amplifier for D-Link DIR-810L
[openwrt/openwrt.git] / target / linux / ramips / dts / WN-AC1167GR.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include "mt7620a.dtsi"
5
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8
9 / {
10 compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
11 model = "I-O DATA WN-AC1167GR";
12
13 aliases {
14 led-boot = &led_power;
15 led-failsafe = &led_power;
16 led-running = &led_power;
17 led-upgrade = &led_power;
18 };
19
20 memory@0 {
21 device_type = "memory";
22 reg = <0x0 0x4000000>;
23 };
24
25 leds {
26 compatible = "gpio-leds";
27
28 led_power: power {
29 label = "wn-ac1167gr:green:power";
30 gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
31 default-state = "on";
32 };
33
34 wlan2g {
35 label = "wn-ac1167gr:green:wlan2g";
36 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
37 };
38
39 notification {
40 label = "wn-ac1167gr:green:notification";
41 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
42 };
43
44 wlan5g {
45 label = "wn-ac1167gr:green:wlan5g";
46 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
47 };
48 };
49
50 keys {
51 compatible = "gpio-keys-polled";
52 poll-interval = <20>;
53
54 wps {
55 label = "wps";
56 gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
57 linux,code = <KEY_WPS_BUTTON>;
58 };
59
60 reset {
61 label = "reset";
62 gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
63 linux,code = <KEY_RESTART>;
64 };
65
66 auto {
67 label = "auto";
68 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
69 linux,code = <BTN_0>;
70 linux,input-type = <EV_SW>;
71 };
72 };
73 };
74
75 &spi0 {
76 status = "okay";
77
78 flash@0 {
79 compatible = "jedec,spi-nor";
80 reg = <0>;
81 spi-max-frequency = <10000000>;
82
83 partitions {
84 compatible = "fixed-partitions";
85 #address-cells = <1>;
86 #size-cells = <1>;
87
88 partition@0 {
89 label = "u-boot";
90 reg = <0x0 0x30000>;
91 read-only;
92 };
93
94 partition@30000 {
95 label = "u-boot-env";
96 reg = <0x30000 0x10000>;
97 read-only;
98 };
99
100 Factory: partition@40000 {
101 label = "Factory";
102 reg = <0x40000 0x8000>;
103 read-only;
104 };
105
106 iNIC_rf: partition@48000 {
107 label = "iNIC_rf";
108 reg = <0x48000 0x8000>;
109 read-only;
110 };
111
112 partition@50000 {
113 label = "NoUsed";
114 reg = <0x50000 0x20000>;
115 read-only;
116 };
117
118 partition@70000 {
119 compatible = "denx,uimage";
120 label = "firmware";
121 reg = <0x70000 0x6b4000>;
122 };
123
124 partition@724000 {
125 label = "manufacture";
126 reg = <0x724000 0x8c000>;
127 read-only;
128 };
129
130 partition@7b0000 {
131 label = "backup";
132 reg = <0x7b0000 0x10000>;
133 read-only;
134 };
135
136 partition@7c0000 {
137 label = "storage";
138 reg = <0x7c0000 0x40000>;
139 read-only;
140 };
141 };
142 };
143 };
144
145 &ethernet {
146 pinctrl-names = "default";
147 pinctrl-0 = <&rgmii1_pins &mdio_pins>;
148 mtd-mac-address = <&Factory 0x4>;
149
150 port@5 {
151 status = "okay";
152 mediatek,fixed-link = <1000 1 1 1>;
153 phy-mode = "rgmii";
154 };
155
156 mdio-bus {
157 #address-cells = <1>;
158 #size-cells = <0>;
159 status = "okay";
160
161 ethernet-phy@0 {
162 reg = <0>;
163 phy-mode = "rgmii";
164 };
165
166 ethernet-phy@1 {
167 reg = <1>;
168 phy-mode = "rgmii";
169 };
170
171 ethernet-phy@2 {
172 reg = <2>;
173 phy-mode = "rgmii";
174 };
175
176 ethernet-phy@3 {
177 reg = <3>;
178 phy-mode = "rgmii";
179 };
180
181 ethernet-phy@4 {
182 reg = <4>;
183 phy-mode = "rgmii";
184 };
185
186 ethernet-phy@1f {
187 reg = <0x1f>;
188 phy-mode = "rgmii";
189 };
190 };
191 };
192
193 &pinctrl {
194 state_default: pinctrl0 {
195 gpio {
196 ralink,group = "i2c", "uartf";
197 ralink,function = "gpio";
198 };
199 };
200 };
201
202 &pcie {
203 status = "okay";
204 };
205
206 &pcie0 {
207 wifi@0,0 {
208 reg = <0x0000 0 0 0 0>;
209 mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
210 ieee80211-freq-limit = <5000000 6000000>;
211 };
212 };
213
214 &wmac {
215 ralink,mtd-eeprom = <&Factory 0x0>;
216 };