target/linux/ramips/dts/WNDR3700V5.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board","ralink,mt7621-soc";
   7         model = "Netgear WNDR3700v5";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600 maxcpus=2";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 wps {
  22                         label = "wndr3700v5:green:wps";
  23                         gpios = <&gpio0 12 1>;
  24                 };
  25
  26                 power {
  27                         label = "wndr3700v5:green:power";
  28                         gpios = <&gpio0 18 1>;
  29                 };
  30         };
  31
  32         gpio-keys-polled {
  33                 compatible = "gpio-keys-polled";
  34                 #address-cells = <1>;
  35                 #size-cells = <0>;
  36                 poll-interval = <20>;
  37
  38                 wps {
  39                         label = "wndr3700v5:wps";
  40                         gpios = <&gpio0 7 0>;
  41                         linux,code = <0x211>;
  42                 };
  43
  44                 wifi {
  45                         label = "wndr3700v5:wifi";
  46                         gpios = <&gpio0 8 0>;
  47                         linux,code = <0xf7>;
  48                 };
  49
  50                 reset {
  51                         label = "wndr3700v5:reset";
  52                         gpios = <&gpio0 14 0>;
  53                         linux,code = <0x198>;
  54                 };
  55         };
  56
  57         gpio_export {
  58                 compatible = "gpio-export";
  59                 #size-cells = <0>;
  60
  61                 usbpower {
  62                         gpio-export,name = "usbpower";
  63                         gpio-export,output = <1>;
  64                         gpios = <&gpio0 10 1>;
  65                 };
  66         };
  67 };
  68
  69 &spi0 {
  70         status = "okay";
  71
  72         m25p80@0 {
  73                 #address-cells = <1>;
  74                 #size-cells = <1>;
  75                 compatible = "mx25l12805d";
  76                 reg = <0>;
  77                 linux,modalias = "m25p80", "w25q128";
  78                 spi-max-frequency = <10000000>;
  79
  80                 partition@0 {
  81                         label = "u-boot";
  82                         reg = <0x0 0x30000>;
  83                 };
  84
  85                 partition@30000 {
  86                         label = "u-boot-env";
  87                         reg = <0x30000 0x10000>;
  88                         read-only;
  89                 };
  90
  91                 factory: partition@f30000 {
  92                         label = "factory";
  93                         reg = <0xf30000 0x10000>;
  94                         read-only;
  95                 };
  96
  97                 partition@50000 {
  98                         label = "firmware";
  99                         reg = <0x50000 0xfb0000>;
 100                 };
 101         };
 102 };
 103
 104 &pcie {
 105         status = "okay";
 106
 107         pcie0 {
 108                 mt76@0,0 {
 109                         reg = <0x0000 0 0 0 0>;
 110                         device_type = "pci";
 111                         mediatek,mtd-eeprom = <&factory 0x0004>;
 112                         mediatek,2ghz = <0>;
 113                 };
 114         };
 115
 116         pcie2 {
 117                 mt76@2,0 {
 118                         reg = <0x1000 0 0 0 0>;
 119                         device_type = "pci";
 120                         mediatek,mtd-eeprom = <&factory 0x8004>;
 121                         mediatek,5ghz = <0>;
 122                 };
 123         };
 124 };
 125
 126 &ethernet {
 127         mtd-mac-address = <&factory 0x0000000c>;
 128 };
 129
 130 &pinctrl {
 131         state_default: pinctrl0 {
 132                 gpio {
 133                         ralink,group =  "rgmii2", "mdio", "wdt";
 134                         ralink,function = "gpio";
 135                 };
 136         };
 137 };