ramips: update device tree source files
[openwrt/openwrt.git] / target / linux / ramips / dts / WNDR3700V5.dts
1 /dts-v1/;
2
3 #include "mt7621.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
10 model = "Netgear WNDR3700v5";
11
12 memory@0 {
13 device_type = "memory";
14 reg = <0x0 0x8000000>;
15 };
16
17 chosen {
18 bootargs = "console=ttyS0,57600 maxcpus=2";
19 };
20
21 gpio-leds {
22 compatible = "gpio-leds";
23
24 wps {
25 label = "wndr3700v5:green:wps";
26 gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
27 };
28
29 power {
30 label = "wndr3700v5:green:power";
31 gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
32 };
33 };
34
35 gpio-keys-polled {
36 compatible = "gpio-keys-polled";
37 #address-cells = <1>;
38 #size-cells = <0>;
39 poll-interval = <20>;
40
41 wps {
42 label = "wndr3700v5:wps";
43 gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
44 linux,code = <KEY_WPS_BUTTON>;
45 };
46
47 wifi {
48 label = "wndr3700v5:wifi";
49 gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
50 linux,code = <KEY_RFKILL>;
51 };
52
53 reset {
54 label = "wndr3700v5:reset";
55 gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
56 linux,code = <KEY_RESTART>;
57 };
58 };
59
60 gpio_export {
61 compatible = "gpio-export";
62 #size-cells = <0>;
63
64 usbpower {
65 gpio-export,name = "usbpower";
66 gpio-export,output = <1>;
67 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
68 };
69 };
70 };
71
72 &spi0 {
73 status = "okay";
74
75 mx25l12805d@0 {
76 #address-cells = <1>;
77 #size-cells = <1>;
78 compatible = "jedec,spi-nor";
79 reg = <0>;
80 spi-max-frequency = <10000000>;
81 m25p,chunked-io = <32>;
82
83 partition@0 {
84 label = "u-boot";
85 reg = <0x0 0x30000>;
86 read-only;
87 };
88
89 partition@30000 {
90 label = "u-boot-env";
91 reg = <0x30000 0x10000>;
92 read-only;
93 };
94
95 factory: partition@f30000 {
96 label = "factory";
97 reg = <0xf30000 0x10000>;
98 read-only;
99 };
100
101 partition@50000 {
102 label = "firmware";
103 reg = <0x50000 0xee0000>;
104 };
105 };
106 };
107
108 &pcie {
109 status = "okay";
110
111 pcie0 {
112 mt76@0,0 {
113 reg = <0x0000 0 0 0 0>;
114 device_type = "pci";
115 mediatek,mtd-eeprom = <&factory 0x8000>;
116 ieee80211-freq-limit = <5000000 6000000>;
117 };
118 };
119
120 pcie1 {
121 mt76@1,0 {
122 reg = <0x0000 0 0 0 0>;
123 device_type = "pci";
124 mediatek,mtd-eeprom = <&factory 0x0000>;
125 };
126 };
127 };
128
129 &ethernet {
130 mtd-mac-address = <&factory 0x0000000c>;
131 };
132
133 &pinctrl {
134 state_default: pinctrl0 {
135 gpio {
136 ralink,group = "rgmii2", "mdio", "wdt";
137 ralink,function = "gpio";
138 };
139 };
140 };