target/linux/ramips/dts/WNDR3700V5.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Netgear WNDR3700v5";
   9
  10         memory@0 {
  11                 device_type = "memory";
  12                 reg = <0x0 0x8000000>;
  13         };
  14
  15         chosen {
  16                 bootargs = "console=ttyS0,57600 maxcpus=2";
  17         };
  18
  19         gpio-leds {
  20                 compatible = "gpio-leds";
  21
  22                 wps {
  23                         label = "wndr3700v5:green:wps";
  24                         gpios = <&gpio0 12 1>;
  25                 };
  26
  27                 power {
  28                         label = "wndr3700v5:green:power";
  29                         gpios = <&gpio0 18 1>;
  30                 };
  31         };
  32
  33         gpio-keys-polled {
  34                 compatible = "gpio-keys-polled";
  35                 #address-cells = <1>;
  36                 #size-cells = <0>;
  37                 poll-interval = <20>;
  38
  39                 wps {
  40                         label = "wndr3700v5:wps";
  41                         gpios = <&gpio0 7 0>;
  42                         linux,code = <KEY_WPS_BUTTON>;
  43                 };
  44
  45                 wifi {
  46                         label = "wndr3700v5:wifi";
  47                         gpios = <&gpio0 8 0>;
  48                         linux,code = <KEY_RFKILL>;
  49                 };
  50
  51                 reset {
  52                         label = "wndr3700v5:reset";
  53                         gpios = <&gpio0 14 0>;
  54                         linux,code = <KEY_RESTART>;
  55                 };
  56         };
  57
  58         gpio_export {
  59                 compatible = "gpio-export";
  60                 #size-cells = <0>;
  61
  62                 usbpower {
  63                         gpio-export,name = "usbpower";
  64                         gpio-export,output = <1>;
  65                         gpios = <&gpio0 10 1>;
  66                 };
  67         };
  68 };
  69
  70 &spi0 {
  71         status = "okay";
  72
  73         mx25l12805d@0 {
  74                 #address-cells = <1>;
  75                 #size-cells = <1>;
  76                 compatible = "jedec,spi-nor";
  77                 reg = <0>;
  78                 spi-max-frequency = <10000000>;
  79                 m25p,chunked-io = <32>;
  80
  81                 partition@0 {
  82                         label = "u-boot";
  83                         reg = <0x0 0x30000>;
  84                         read-only;
  85                 };
  86
  87                 partition@30000 {
  88                         label = "u-boot-env";
  89                         reg = <0x30000 0x10000>;
  90                         read-only;
  91                 };
  92
  93                 factory: partition@f30000 {
  94                         label = "factory";
  95                         reg = <0xf30000 0x10000>;
  96                         read-only;
  97                 };
  98
  99                 partition@50000 {
 100                         label = "firmware";
 101                         reg = <0x50000 0xee0000>;
 102                 };
 103         };
 104 };
 105
 106 &pcie {
 107         status = "okay";
 108
 109         pcie0 {
 110                 mt76@0,0 {
 111                         reg = <0x0000 0 0 0 0>;
 112                         device_type = "pci";
 113                         mediatek,mtd-eeprom = <&factory 0x8000>;
 114                         ieee80211-freq-limit = <5000000 6000000>;
 115                 };
 116         };
 117
 118         pcie1 {
 119                 mt76@1,0 {
 120                         reg = <0x0000 0 0 0 0>;
 121                         device_type = "pci";
 122                         mediatek,mtd-eeprom = <&factory 0x0000>;
 123                 };
 124         };
 125 };
 126
 127 &ethernet {
 128         mtd-mac-address = <&factory 0x0000000c>;
 129 };
 130
 131 &pinctrl {
 132         state_default: pinctrl0 {
 133                 gpio {
 134                         ralink,group =  "rgmii2", "mdio", "wdt";
 135                         ralink,function = "gpio";
 136                 };
 137         };
 138 };