target/linux/ramips/dts/WR6202.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "accton,wr6202", "ralink,rt3052-soc";
  10         model = "AWB WR6202";
  11
  12         chosen {
  13                 bootargs = "console=ttyS0,115200";
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 wps {
  20                         label = "wr6202:blue:wps";
  21                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 3g {
  25                         label = "wr6202:blue:3g";
  26                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 poll-interval = <20>;
  35
  36                 reset {
  37                         label = "reset";
  38                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_RESTART>;
  40                 };
  41
  42                 wps {
  43                         label = "wps";
  44                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_WPS_BUTTON>;
  46                 };
  47         };
  48
  49         cfi@1f000000 {
  50                 compatible = "cfi-flash";
  51                 reg = <0x1f000000 0x800000>;
  52                 bank-width = <2>;
  53                 device-width = <2>;
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56
  57                 partition@0 {
  58                         label = "u-boot";
  59                         reg = <0x0 0x30000>;
  60                         read-only;
  61                 };
  62
  63                 partition@30000 {
  64                         label = "u-boot-env";
  65                         reg = <0x30000 0x10000>;
  66                         read-only;
  67                 };
  68
  69                 factory: partition@40000 {
  70                         label = "factory";
  71                         reg = <0x40000 0x10000>;
  72                         read-only;
  73                 };
  74
  75                 partition@50000 {
  76                         label = "firmware";
  77                         reg = <0x50000 0x7b0000>;
  78                 };
  79         };
  80
  81         gpio_export {
  82                 compatible = "gpio-export";
  83                 #size-cells = <0>;
  84
  85                 usb {
  86                         gpio-export,name = "usb";
  87                         gpio-export,output = <0>;
  88                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  89                 };
  90         };
  91 };
  92
  93 &pinctrl {
  94         state_default: pinctrl0 {
  95                 gpio {
  96                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  97                         ralink,function = "gpio";
  98                 };
  99         };
 100 };
 101
 102 &ethernet {
 103         mtd-mac-address = <&factory 0x28>;
 104 };
 105
 106 &esw {
 107         mediatek,portmap = <0x3e>;
 108 };
 109
 110 &wmac {
 111         ralink,mtd-eeprom = <&factory 0>;
 112 };
 113
 114 &otg {
 115         status = "okay";
 116 };