target/linux/ramips/dts/WR6202.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "WR6202", "ralink,rt3052-soc";
   7         model = "AWB WR6202";
   8
   9         chosen {
  10                 bootargs = "console=ttyS0,115200";
  11         };
  12
  13         gpio-leds {
  14                 compatible = "gpio-leds";
  15
  16                 wps {
  17                         label = "wr6202:blue:wps";
  18                         gpios = <&gpio0 14 1>;
  19                 };
  20
  21                 3g {
  22                         label = "wr6202:blue:3g";
  23                         gpios = <&gpio0 13 1>;
  24                 };
  25         };
  26
  27         gpio-keys-polled {
  28                 compatible = "gpio-keys-polled";
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31                 poll-interval = <20>;
  32
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&gpio0 10 1>;
  36                         linux,code = <0x198>;
  37                 };
  38
  39                 wps {
  40                         label = "wps";
  41                         gpios = <&gpio0 0 1>;
  42                         linux,code = <0x211>;
  43                 };
  44         };
  45
  46         cfi@1f000000 {
  47                 compatible = "cfi-flash";
  48                 reg = <0x1f000000 0x800000>;
  49                 bank-width = <2>;
  50                 device-width = <2>;
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53
  54                 partition@0 {
  55                         label = "u-boot";
  56                         reg = <0x0 0x30000>;
  57                         read-only;
  58                 };
  59
  60                 partition@30000 {
  61                         label = "u-boot-env";
  62                         reg = <0x30000 0x10000>;
  63                         read-only;
  64                 };
  65
  66                 factory: partition@40000 {
  67                         label = "factory";
  68                         reg = <0x40000 0x10000>;
  69                         read-only;
  70                 };
  71
  72                 partition@50000 {
  73                         label = "firmware";
  74                         reg = <0x50000 0x7b0000>;
  75                 };
  76         };
  77
  78         gpio_export {
  79                 compatible = "gpio-export";
  80                 #size-cells = <0>;
  81
  82                 usb {
  83                         gpio-export,name = "usb";
  84                         gpio-export,output = <0>;
  85                         gpios = <&gpio0 11 0>;
  86                 };
  87         };
  88 };
  89
  90 &pinctrl {
  91         state_default: pinctrl0 {
  92                 gpio {
  93                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  94                         ralink,function = "gpio";
  95                 };
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&factory 0x28>;
 101 };
 102
 103 &esw {
 104         mediatek,portmap = <0x3e>;
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&factory 0>;
 109 };
 110
 111 &otg {
 112         status = "okay";
 113 };