target/linux/ramips/dts/WRTNODE.dts

   1 /dts-v1/;
   2
   3 #include "mt7620n.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6
   7 / {
   8         compatible = "wrtnode,wrtnode", "ralink,mt7620n-soc";
   9         model = "WRTNODE";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 indicator {
  15                         label = "wrtnode:blue:indicator";
  16                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  17                 };
  18         };
  19 };
  20
  21 &gpio1 {
  22         status = "okay";
  23 };
  24
  25 &gpio2 {
  26         status = "okay";
  27 };
  28
  29 &gpio3 {
  30         status = "okay";
  31 };
  32
  33 &spi0 {
  34         status = "okay";
  35
  36         m25p80@0 {
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 compatible = "jedec,spi-nor";
  40                 reg = <0>;
  41                 spi-max-frequency = <10000000>;
  42
  43                 partition@0 {
  44                         label = "u-boot";
  45                         reg = <0x0 0x30000>;
  46                         read-only;
  47                 };
  48
  49                 partition@30000 {
  50                         label = "u-boot-env";
  51                         reg = <0x30000 0x10000>;
  52                         read-only;
  53                 };
  54
  55                 factory: partition@40000 {
  56                         label = "factory";
  57                         reg = <0x40000 0x10000>;
  58                         read-only;
  59                 };
  60
  61                 partition@50000 {
  62                         label = "firmware";
  63                         reg = <0x50000 0xfb0000>;
  64                 };
  65         };
  66 };
  67
  68 &ehci {
  69         status = "okay";
  70 };
  71
  72 &ohci {
  73         status = "okay";
  74 };
  75
  76 &ethernet {
  77         mtd-mac-address = <&factory 0x4>;
  78         mediatek,portmap = "wllll";
  79 };
  80
  81 &wmac {
  82         ralink,mtd-eeprom = <&factory 0>;
  83 };
  84
  85 &pinctrl {
  86         state_default: pinctrl0 {
  87                 default {
  88                         ralink,group = "ephy", "wled", "pa", "i2c", "wdt", "uartf", "spi refclk";
  89                         ralink,function = "gpio";
  90                 };
  91         };
  92 };