target/linux/ramips/dts/X5.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "X5", "ralink,rt5350-soc";
   9         model = "Poray X5";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 power {
  15                         label = "x5:green:power";
  16                         gpios = <&gpio0 13 1>;
  17                 };
  18
  19                 20 {
  20                         label = "x5:green:20";
  21                         gpios = <&gpio0 12 1>;
  22                 };
  23
  24                 50 {
  25                         label = "x5:green:50";
  26                         gpios = <&gpio0 11 1>;
  27                 };
  28
  29                 80 {
  30                         label = "x5:green:80";
  31                         gpios = <&gpio0 7 1>;
  32                 };
  33         };
  34
  35         gpio-keys-polled {
  36                 compatible = "gpio-keys-polled";
  37                 #address-cells = <1>;
  38                 #size-cells = <0>;
  39                 poll-interval = <20>;
  40
  41                 bat {
  42                         label = "bat";
  43                         gpios = <&gpio0 9 1>;
  44                         linux,code = <KEY_WPS_BUTTON>;
  45                 };
  46
  47                 reset {
  48                         label = "reset";
  49                         gpios = <&gpio0 10 1>;
  50                         linux,code = <KEY_RESTART>;
  51                 };
  52
  53                 mode {
  54                         label = "mode";
  55                         gpios = <&gpio0 14 1>;
  56                         linux,code = <BTN_0>;
  57                         linux,input-type = <EV_SW>;
  58                 };
  59         };
  60
  61         gpio_export {
  62                 compatible = "gpio-export";
  63                 #size-cells = <0>;
  64
  65                 usb-mode {
  66                         gpio-export,name = "usb-mode";
  67                         gpio-export,output = <0>;
  68                         gpios = <&gpio0 18 0>;
  69                 };
  70         };
  71 };
  72
  73 &spi0 {
  74         status = "okay";
  75
  76         m25p80@0 {
  77                 #address-cells = <1>;
  78                 #size-cells = <1>;
  79                 compatible = "jedec,spi-nor";
  80                 reg = <0>;
  81                 spi-max-frequency = <10000000>;
  82
  83                 partition@0 {
  84                         label = "u-boot";
  85                         reg = <0x0 0x30000>;
  86                         read-only;
  87                 };
  88
  89                 partition@30000 {
  90                         label = "u-boot-env";
  91                         reg = <0x30000 0x10000>;
  92                         read-only;
  93                 };
  94
  95                 factory: partition@40000 {
  96                         label = "factory";
  97                         reg = <0x40000 0x10000>;
  98                         read-only;
  99                 };
 100
 101                 partition@50000 {
 102                         label = "firmware";
 103                         reg = <0x50000 0x7b0000>;
 104                 };
 105         };
 106 };
 107
 108 &pinctrl {
 109         state_default: pinctrl0 {
 110                 gpio {
 111                         ralink,group = "i2c", "jtag", "uartf";
 112                         ralink,function = "gpio";
 113                 };
 114         };
 115 };
 116
 117 &ethernet {
 118         mtd-mac-address = <&factory 0x4>;
 119 };
 120
 121 &esw {
 122         mediatek,portmap = <0x2f>;
 123         mediatek,led_polarity = <1>;
 124 };
 125
 126 &wmac {
 127         ralink,mtd-eeprom = <&factory 0>;
 128         ralink,led-polarity = <1>;
 129 };
 130
 131 &ehci {
 132         status = "okay";
 133 };
 134
 135 &ohci {
 136         status = "okay";
 137 };