target/linux/ramips/dts/mt7620a_hiwifi_hc5861.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a_hiwifi_hc5x61.dtsi"
   4
   5 / {
   6         compatible = "hiwifi,hc5861", "hiwifi,hc5x61", "ralink,mt7620a-soc";
   7         model = "HiWiFi HC5861";
   8
   9         aliases {
  10                 led-boot = &led_system;
  11                 led-failsafe = &led_system;
  12                 led-running = &led_system;
  13                 led-upgrade = &led_system;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_system: system {
  20                         label = "hc5861:blue:system";
  21                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 wlan2g {
  25                         label = "hc5861:blue:wlan2g";
  26                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  27                         linux,default-trigger = "phy1tpt";
  28                 };
  29
  30                 internet {
  31                         label = "hc5861:blue:internet";
  32                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wlan5g {
  36                         label = "hc5861:blue:wlan5g";
  37                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 turbo {
  42                         label = "hc5861:blue:turbo";
  43                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         gpio_export {
  48                 compatible = "gpio-export";
  49                 #size-cells = <0>;
  50
  51                 usbpower {
  52                         gpio-export,name = "usbpower";
  53                         gpio-export,output = <0>;
  54                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 sdpower {
  58                         gpio-export,name = "sdpower";
  59                         gpio-export,output = <0>;
  60                         gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63 };
  64
  65 &ehci {
  66         status = "okay";
  67 };
  68
  69 &ohci {
  70         status = "okay";
  71 };
  72
  73 &ethernet {
  74         status = "okay";
  75         mtd-mac-address = <&factory 0x4>;
  76         pinctrl-names = "default";
  77         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
  78         mediatek,portmap = "wllll";
  79
  80         port@5 {
  81                 status = "okay";
  82                 phy-handle = <&phy5>;
  83                 phy-mode = "rgmii";
  84         };
  85
  86         mdio-bus {
  87                 status = "okay";
  88
  89                 phy5: ethernet-phy@5 {
  90                         reg = <5>;
  91                         phy-mode = "rgmii";
  92                 };
  93         };
  94 };
  95
  96 &pcie {
  97         status = "okay";
  98 };
  99
 100 &pcie0 {
 101         wifi@0,0 {
 102                 compatible = "pci14c3,7662";
 103                 reg = <0x0000 0 0 0 0>;
 104                 mediatek,mtd-eeprom = <&factory 0x8000>;
 105                 ieee80211-freq-limit = <5000000 6000000>;
 106         };
 107 };