target/linux/ramips/dts/mt7620a_planex_mzk-ex750np.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-ex750np", "ralink,mt7620a-soc";
  10         model = "Planex MZK-EX750NP";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: power {
  23                         label = "mzk-ex750np:red:power";
  24                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  25                 };
  26
  27                 wifi {
  28                         label = "mzk-ex750np:red:wifi";
  29                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 wps {
  33                         label = "mzk-ex750np:green:wps";
  34                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 rep {
  38                         label = "mzk-ex750np:blue:rep";
  39                         gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wifi1 {
  43                         label = "mzk-ex750np:blue:wifi1";
  44                         gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 wifi2 {
  48                         label = "mzk-ex750np:blue:wifi2";
  49                         gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 wifi3 {
  53                         label = "mzk-ex750np:blue:wifi3";
  54                         gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         keys {
  59                 compatible = "gpio-keys";
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_RESTART>;
  65                 };
  66
  67                 wps {
  68                         label = "wps";
  69                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  70                         linux,code = <KEY_RFKILL>;
  71                 };
  72         };
  73 };
  74
  75 &gpio2 {
  76         status = "okay";
  77 };
  78
  79 &gpio3 {
  80         status = "okay";
  81 };
  82
  83 &spi0 {
  84         status = "okay";
  85
  86         flash@0 {
  87                 compatible = "jedec,spi-nor";
  88                 reg = <0>;
  89                 spi-max-frequency = <10000000>;
  90
  91                 partitions {
  92                         compatible = "fixed-partitions";
  93                         #address-cells = <1>;
  94                         #size-cells = <1>;
  95
  96                         partition@0 {
  97                                 label = "u-boot";
  98                                 reg = <0x0 0x30000>;
  99                                 read-only;
 100                         };
 101
 102                         partition@30000 {
 103                                 label = "u-boot-env";
 104                                 reg = <0x30000 0x10000>;
 105                                 read-only;
 106                         };
 107
 108                         factory: partition@40000 {
 109                                 label = "factory";
 110                                 reg = <0x40000 0x10000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@50000 {
 115                                 compatible = "denx,uimage";
 116                                 label = "firmware";
 117                                 reg = <0x50000 0x730000>;
 118                         };
 119
 120                         partition@780000 {
 121                                 label = "Udata";
 122                                 reg = <0x780000 0x80000>;
 123                         };
 124                 };
 125         };
 126 };
 127
 128 &state_default {
 129         gpio {
 130                 groups = "uartf", "nd_sd", "rgmii2", "wled";
 131                 function = "gpio";
 132         };
 133 };
 134
 135 &ethernet {
 136         pinctrl-names = "default";
 137         pinctrl-0 = <&ephy_pins>;
 138         mtd-mac-address = <&factory 0x4>;
 139         mediatek,portmap = "llllw";
 140 };
 141
 142 &wmac {
 143         ralink,mtd-eeprom = <&factory 0x0>;
 144 };
 145
 146 &pcie {
 147         status = "okay";
 148 };
 149
 150 &pcie0 {
 151         mt76@0,0 {
 152                 reg = <0x0000 0 0 0 0>;
 153                 mediatek,mtd-eeprom = <&factory 0x8000>;
 154         };
 155 };