target/linux/ramips/dts/mt7620a_zbtlink_zbt-we826.dtsi

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "zbtlink,zbt-we826", "ralink,mt7620a-soc";
   8
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_power: power {
  24                         label = "zbt-we826:green:power";
  25                         gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
  26                 };
  27
  28                 usb {
  29                         label = "zbt-we826:green:usb";
  30                         gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
  31                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34
  35                 air {
  36                         label = "zbt-we826:green:wifi";
  37                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  38                 };
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "reset";
  46                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_RESTART>;
  48                 };
  49         };
  50 };
  51
  52 &gpio0 {
  53         status = "okay";
  54 };
  55
  56 &gpio1 {
  57         status = "okay";
  58 };
  59
  60 &gpio3 {
  61         status = "okay";
  62 };
  63
  64 &sdhci {
  65         status = "okay";
  66 };
  67
  68 &ehci {
  69         status = "okay";
  70 };
  71
  72 &ohci {
  73         status = "okay";
  74 };
  75
  76 &ethernet {
  77         mtd-mac-address = <&factory 0x4>;
  78         mediatek,portmap = "wllll";
  79 };
  80
  81 &wmac {
  82         ralink,mtd-eeprom = <&factory 0x0>;
  83 };
  84
  85 &state_default {
  86         default {
  87                 groups = "i2c", "uartf", "wled", "spi refclk", "pa";
  88                 function = "gpio";
  89         };
  90 };
  91
  92 &pcie {
  93         status = "okay";
  94 };