target/linux/ramips/dts/mt7620n_vonets_var11n-300.dts

   1 #include "mt7620n.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "vonets,var11n-300", "ralink,mt7620n-soc";
   8         model = "Vonets VAR11N-300";
   9
  10         aliases {
  11                 led-boot = &led_system;
  12                 led-failsafe = &led_system;
  13                 led-running = &led_system;
  14                 led-upgrade = &led_system;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 led_system: system {
  21                         label = "blue:system";
  22                         gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
  23                 };
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys";
  28
  29                 reset {
  30                         label = "reset";
  31                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  32                         linux,code = <KEY_RESTART>;
  33                 };
  34         };
  35 };
  36
  37 &spi0 {
  38         status = "okay";
  39
  40         flash@0 {
  41                 compatible = "jedec,spi-nor";
  42                 reg = <0>;
  43                 spi-max-frequency = <10000000>;
  44
  45                 partitions {
  46                         compatible = "fixed-partitions";
  47                         #address-cells = <1>;
  48                         #size-cells = <1>;
  49
  50                         partition@0 {
  51                                 label = "u-boot";
  52                                 reg = <0x0 0x30000>;
  53                                 read-only;
  54                         };
  55
  56                         partition@30000 {
  57                                 label = "u-boot-env";
  58                                 reg = <0x30000 0x10000>;
  59                                 read-only;
  60                         };
  61
  62                         factory: partition@40000 {
  63                                 label = "factory";
  64                                 reg = <0x40000 0x10000>;
  65                                 read-only;
  66                         };
  67
  68                         partition@50000 {
  69                                 compatible = "denx,uimage";
  70                                 label = "firmware";
  71                                 reg = <0x50000 0x3b0000>;
  72                         };
  73                 };
  74         };
  75 };
  76
  77 &ethernet {
  78         mtd-mac-address = <&factory 0x4>;
  79
  80         mediatek,portmap = "llllw";
  81 };
  82
  83 &wmac {
  84         ralink,mtd-eeprom = <&factory 0x0>;
  85 };
  86
  87 &state_default {
  88         default {
  89                 groups = "i2c";
  90                 function = "gpio";
  91         };
  92 };