target/linux/ramips/dts/mt7621_elecom_wrc-1167ghbk2-s.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "elecom,wrc-1167ghbk2-s", "mediatek,mt7621-soc";
   8         model = "ELECOM WRC-1167GHBK2-S";
   9
  10         aliases {
  11                 led-boot = &led_power_green;
  12                 led-failsafe = &led_power_green;
  13                 led-running = &led_power_green;
  14                 led-upgrade = &led_power_green;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 wlan2g {
  21                         label = "white:wlan2g";
  22                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  23                         linux,default-trigger = "phy0radio";
  24                 };
  25
  26                 wlan5g {
  27                         label = "white:wlan5g";
  28                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 led_power_green: power_green {
  32                         label = "green:power";
  33                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  34                 };
  35
  36                 power_blue {
  37                         label = "blue:power";
  38                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  39                 };
  40
  41                 wps {
  42                         label = "red:wps";
  43                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  44                 };
  45
  46                 power_red {
  47                         label = "red:power";
  48                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  49                 };
  50         };
  51
  52         keys {
  53                 compatible = "gpio-keys";
  54
  55                 reset {
  56                         label = "reset";
  57                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  58                         linux,code = <KEY_RESTART>;
  59                 };
  60
  61                 wps {
  62                         label = "wps";
  63                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  64                         linux,code = <KEY_WPS_BUTTON>;
  65                 };
  66         };
  67 };
  68
  69 &gmac0 {
  70         mtd-mac-address = <&factory 0xe000>;
  71 };
  72
  73 &switch0 {
  74         ports {
  75                 port@0 {
  76                         status = "okay";
  77                         label = "wan";
  78                         mtd-mac-address = <&factory 0xe006>;
  79                 };
  80
  81                 port@1 {
  82                         status = "okay";
  83                         label = "lan4";
  84                 };
  85
  86                 port@2 {
  87                         status = "okay";
  88                         label = "lan3";
  89                 };
  90
  91                 port@3 {
  92                         status = "okay";
  93                         label = "lan2";
  94                 };
  95
  96                 port@4 {
  97                         status = "okay";
  98                         label = "lan1";
  99                 };
 100         };
 101 };
 102
 103 &spi0 {
 104         status = "okay";
 105
 106         flash@0 {
 107                 compatible = "jedec,spi-nor";
 108                 reg = <0>;
 109                 spi-max-frequency = <10000000>;
 110
 111                 partitions {
 112                         compatible = "fixed-partitions";
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115
 116                         partition@0 {
 117                                 label = "u-boot";
 118                                 reg = <0x0 0x30000>;
 119                                 read-only;
 120                         };
 121
 122                         partition@30000 {
 123                                 label = "u-boot-env";
 124                                 reg = <0x30000 0x10000>;
 125                                 read-only;
 126                         };
 127
 128                         factory: partition@40000 {
 129                                 label = "factory";
 130                                 reg = <0x40000 0x10000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@50000 {
 135                                 compatible = "denx,uimage";
 136                                 label = "firmware";
 137                                 reg = <0x50000 0xf20000>;
 138                         };
 139
 140                         partition@f70000 {
 141                                 label = "user_data";
 142                                 reg = <0xf70000 0x80000>;
 143                                 read-only;
 144                         };
 145
 146                         partition@ff0000 {
 147                                 label = "NVRAM";
 148                                 reg = <0xff0000 0x10000>;
 149                                 read-only;
 150                         };
 151                 };
 152         };
 153 };
 154
 155 &state_default {
 156         gpio {
 157                 groups = "i2c", "uart3", "jtag", "wdt";
 158                 function = "gpio";
 159         };
 160 };
 161
 162 &pcie {
 163         status = "okay";
 164 };
 165
 166 &pcie0 {
 167         wifi@0,0 {
 168                 compatible = "mediatek,mt76";
 169                 reg = <0x0000 0 0 0 0>;
 170                 mediatek,mtd-eeprom = <&factory 0x0>;
 171                 mtd-mac-address = <&factory 0xe000>;
 172                 mtd-mac-address-increment = <1>;
 173         };
 174 };
 175
 176 &xhci {
 177         status = "disabled";
 178 };