target/linux/ramips/dts/mt7621_iodata_wn-xx-xr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14                 label-mac-device = &wan;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 wps {
  21                         label = "green:wps";
  22                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 led_power: power {
  26                         label = "green:power";
  27                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys";
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39
  40                 repeater {
  41                         label = "repeater";
  42                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  43                         linux,code = <BTN_0>;
  44                         linux,input-type = <EV_SW>;
  45                 };
  46
  47                 wps {
  48                         label = "wps";
  49                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  50                         linux,code = <KEY_WPS_BUTTON>;
  51                 };
  52         };
  53 };
  54
  55 &nand {
  56         status = "okay";
  57
  58         partitions: partitions {
  59                 compatible = "fixed-partitions";
  60                 #address-cells = <1>;
  61                 #size-cells = <1>;
  62
  63                 partition@0 {
  64                         label = "u-boot";
  65                         reg = <0x0 0x0100000>;
  66                         read-only;
  67                 };
  68
  69                 partition@100000 {
  70                         label = "u-boot-env";
  71                         reg = <0x0100000 0x0100000>;
  72                         read-only;
  73                 };
  74
  75                 factory: partition@200000 {
  76                         label = "factory";
  77                         reg = <0x0200000 0x0100000>;
  78                 };
  79
  80                 partition@300000 {
  81                         label = "SecondBoot";
  82                         reg = <0x0300000 0x0100000>;
  83                         read-only;
  84                 };
  85
  86                 partition@400000 {
  87                         label = "kernel";
  88                         reg = <0x0400000 0x0400000>;
  89                 };
  90
  91                 partition@800000 {
  92                         label = "ubi";
  93                         reg = <0x0800000 0x2e00000>;
  94                 };
  95
  96                 partition@3600000 {
  97                         label = "Config";
  98                         reg = <0x3600000 0x0100000>;
  99                         read-only;
 100                 };
 101
 102                 partition@3700000 {
 103                         label = "firmware_2";
 104                         reg = <0x3700000 0x3200000>;
 105                 };
 106
 107                 partition@6900000 {
 108                         label = "Config_2";
 109                         reg = <0x6900000 0x0100000>;
 110                         read-only;
 111                 };
 112
 113                 partition@6a00000 {
 114                         label = "persist";
 115                         reg = <0x6a00000 0x0100000>;
 116                 };
 117         };
 118 };
 119
 120 &gmac0 {
 121         mtd-mac-address = <&factory 0xe000>;
 122 };
 123
 124 &switch0 {
 125         ports {
 126                 wan: port@0 {
 127                         status = "okay";
 128                         label = "wan";
 129                         mtd-mac-address = <&factory 0xe006>;
 130                 };
 131
 132                 port@1 {
 133                         status = "okay";
 134                         label = "lan4";
 135                 };
 136
 137                 port@2 {
 138                         status = "okay";
 139                         label = "lan3";
 140                 };
 141
 142                 port@3 {
 143                         status = "okay";
 144                         label = "lan2";
 145                 };
 146
 147                 port@4 {
 148                         status = "okay";
 149                         label = "lan1";
 150                 };
 151         };
 152 };
 153
 154 &pcie {
 155         status = "okay";
 156 };
 157
 158 &state_default {
 159         gpio {
 160                 groups = "uart2", "uart3", "wdt";
 161                 function = "gpio";
 162         };
 163 };
 164
 165 &xhci {
 166         status = "disabled";
 167 };