target/linux/ramips/dts/mt7621_phicomm_k2p.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "phicomm,k2p", "mediatek,mt7621-soc";
  10         model = "Phicomm K2P";
  11
  12         aliases {
  13                 led-boot = &led_blue;
  14                 led-failsafe = &led_blue;
  15                 led-running = &led_blue;
  16                 led-upgrade = &led_blue;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,57600";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 stat_r {
  27                         label = "k2p:red:status";
  28                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 stat_y {
  32                         label = "k2p:yellow:status";
  33                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 led_blue: stat_b {
  37                         label = "k2p:blue:status";
  38                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys-polled";
  44                 poll-interval = <20>;
  45
  46                 reset {
  47                         label = "reset";
  48                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  49                         linux,code = <KEY_RESTART>;
  50                 };
  51         };
  52 };
  53
  54 &spi0 {
  55         status = "okay";
  56
  57         m25p80@0 {
  58                 compatible = "jedec,spi-nor";
  59                 reg = <0>;
  60                 spi-max-frequency = <10000000>;
  61
  62                 partitions {
  63                         compatible = "fixed-partitions";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66
  67                         partition@0 {
  68                                 label = "u-boot";
  69                                 reg = <0x0 0x30000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@30000 {
  74                                 label = "u-boot-env";
  75                                 reg = <0x30000 0x10000>;
  76                                 read-only;
  77                         };
  78
  79                         factory: partition@40000 {
  80                                 label = "factory";
  81                                 reg = <0x40000 0x10000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@50000 {
  86                                 label = "permanent_config";
  87                                 reg = <0x50000 0x50000>;
  88                                 read-only;
  89                         };
  90
  91                         partition@a0000 {
  92                                 compatible = "denx,uimage";
  93                                 label = "firmware";
  94                                 reg = <0xa0000 0xf60000>;
  95                         };
  96                 };
  97         };
  98 };
  99
 100 &pcie {
 101         status = "okay";
 102 };
 103
 104 &pcie0 {
 105         mt76@0,0 {
 106                 reg = <0x0000 0 0 0 0>;
 107                 mediatek,mtd-eeprom = <&factory 0x0>;
 108         };
 109 };
 110
 111 &ethernet {
 112         mtd-mac-address = <&factory 0xe000>;
 113 };
 114
 115 &pinctrl {
 116         state_default: pinctrl0 {
 117                 gpio {
 118                         ralink,group = "i2c", "jtag";
 119                         ralink,function = "gpio";
 120                 };
 121         };
 122 };