target/linux/ramips/dts/mt7628an_tama_w06.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "tama,w06", "mediatek,mt7628an-soc";
  10         model = "Tama W06";
  11
  12         leds {
  13                 compatible = "gpio-leds";
  14
  15                 wps {
  16                         label = "w06:green:wps";
  17                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 wan {
  21                         label = "w06:green:wan";
  22                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wireless {
  26                         label = "w06:green:wlan";
  27                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys";
  33
  34                 reset {
  35                         label = "reset";
  36                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_RESTART>;
  38                 };
  39         };
  40 };
  41
  42 &ehci {
  43         status = "okay";
  44 };
  45
  46 &ethernet {
  47         mtd-mac-address = <&factory 0x28>;
  48 };
  49
  50 &ohci {
  51         status = "okay";
  52 };
  53
  54 &pinctrl {
  55         state_default: pinctrl0 {
  56                 gpio {
  57                         ralink,group = "uart1", "p0led_an", "wdt";
  58                         ralink,function = "gpio";
  59                 };
  60         };
  61 };
  62
  63 &spi0 {
  64         status = "okay";
  65
  66         m25p80@0 {
  67                 compatible = "jedec,spi-nor";
  68                 reg = <0>;
  69                 spi-max-frequency = <10000000>;
  70
  71                 partitions {
  72                         compatible = "fixed-partitions";
  73                         #address-cells = <1>;
  74                         #size-cells = <1>;
  75
  76                         partition@0 {
  77                                 label = "u-boot";
  78                                 reg = <0x0 0x30000>;
  79                                 read-only;
  80                         };
  81
  82                         partition@30000 {
  83                                 label = "u-boot-env";
  84                                 reg = <0x30000 0x10000>;
  85                                 read-only;
  86                         };
  87
  88                         factory: partition@40000 {
  89                                 label = "factory";
  90                                 reg = <0x40000 0x10000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@50000 {
  95                                 compatible = "denx,uimage";
  96                                 label = "firmware";
  97                                 reg = <0x50000 0xeb0000>;
  98                         };
  99
 100                         partition@f00000 {
 101                                 label = "user-data";
 102                                 reg = <0xf00000 0x100000>;
 103                                 read-only;
 104                         };
 105                 };
 106         };
 107 };
 108
 109 &wmac {
 110         status = "okay";
 111 };